505957
33
Zoom out
Zoom in
Previous page
1/42
Next page
32
Current event name next event name, and their start and end times.
Program duration bar
Program mode (TV or Radio)
Channel number
Name of the channel
The second press of the info button brings up a box containing a brief description of the currently
viewed programme.
You can now use the > button to change the programme description to that of the next programme on
the current channel.
PR+ / PR – (CHANNEL NAVIGATION )
There are two ways to navigate through the channels:
Pressing PR +/ PR - keys will take you to go to the next or the previous channel in the list.
Pressing a number key will activate a small digit entry window on the left upper corner of the
screen. After a digit is entered, the box will stay for 2 seconds while you enter another digit. If no
digit is entered during these 2 seconds, then the box will switch to the entered number channel.If a
number that is greater than the maximum number of channels is entered, the box will switch
automatically to the last channel.
Press OK button to display the channel list.
VOLUME CONTROL
The volume level of the sound from the receiver can
be altered with the VOL+ and VOL- keys on the
remote control handset. Pressing either key displays
a bar graph of the sound volume on the TV screen.The volume level selected will remain set, even
when the receiver is turned off and on again, until it is altered with VOL + and VOL - keys.The audio
volume adjustment for the receiver is independent of the volume control on your TV set. Be careful
that both volume controls are kept within reasonable levels so that when switching from analogue to
digital television viewing, or when first turning on your TV set, the sound level is not too high.
You can silence the sound from the receiver by pressing the MUTE key. The sound
remains muted until the MUTE key is pressed again, the VOL + or VOL- keys are
pressed. While the sound is muted in this way, the mute symbol is displayed in the top
left of the TV screen. The symbol is removed after 3 seconds, but the sound will remain
muted until the MUTE key is pressed for the second time and the mute symbol will display for 3
seconds.
PIP (PICTURE-IN-PICTURE)
Enables / disables PIP window.
PIP +: next channel in PIP
window.
PIP - : previous channel in PIP
window.
NOTE:
PIP is only available when LOOP
THROUGH is connected. (Please see
page connection diagrams)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDR162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDR162 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info