505956
24
Zoom out
Zoom in
Previous page
1/36
Next page
23
5.2.6. SCAN ENCRYPTED CHANNELS
Use “ / ” buttons to go to the Scan Encrypted Channels option. Use “ / buttons to toggle
YES or NO the searching for encrypted channels.
5.2.7. RECEIVER UPGRADE - OAD
Over Air Download (OAD): To ensure that
your STB always has the most up todate
information. Please ensure that after use it
is set to its standby mode. The STB
automatically powers up at 3.00 A.M. each
day and searches for any new information
which may be broadcast and will download
this to your receiver automatically. This
operation will normally take approximately
30 minutes. If you have an important
recording to make at 3.00 A.M. which must
not have a 30 minutes interrupt then you
can disable the auto OAD search by
performing the following:
Press Menu button and using the
/ buttons to choose Setup
and press the OK button.
Highlight Configuration menu with “/” keys and pres OK.
Use “/” buttons to choose "RECEIVER UPGRADE" and press OK button.
Using the left / right button change “Automatic scanning” from Enabled to Disabled.
Highlight “Scan for upgrade” menu with “/” keys and pres OK to commence upgrade.
Do not forget to re enable the automatic OAD function after you have made your recording by
repeating the above instructions but this time selecting ENABLE.
5.2.8. PARENTAL CONTROL
Use “/ buttons to go to Parental Control option.
Press OK button to enter the menu. A box asking for
the lock key is displayed. The key is set to “0000”
initially. Enter lock key. If it is incorrect, "Wrong Pin"
is displayed. If it is correct, the Parental Control
Menu is displayed.
5.2.8.i. MENU LOCK
In menu lock you can set locking for All Menus, or the Installation Menu to restrict access to these
menu's. If the menu lock is disabled, there will be free access to the menu system. Use “/” buttons
to go to Menu Lock option. Use “/” buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the correct lock key.So the user can’t add, delete,
rename, channels, can’t set timers.
INSTALLATION MENU : Installation menu is locked.So the user can’t add channels. Changes will be
updated after exiting ‘Configuration Menu’.
5.2.8.ii. SET PIN
The PIN code of the unit changed. Use “/
buttons to go to “Set PIN” option. Press OK to
display the “Set PIN window. Use NUMERIC
buttons to enter new pin number you will need to
input your new pin a second time for verification
purposes. If Both pin numbers are four digits long
and the same, the pin will be changed.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDR161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDR161 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info