505954
35
Zoom out
Zoom in
Previous page
1/42
Next page
34
WIDE
TV sets are available with screens of the standard (4:3) format and widescreen (16:9) format. When
you first installed your receiver you specified the format of the connected TV (this can now be altered if
necessary; see Configuration)Digital terrestrial television broadcasts are also made in both standard
and widescreen formats. In particular, films and dramas tend to be broadcast in widescreen format to
closer emulate the cinema experience, but some programmes such as news bulletins are 4:3. To help
get the most from both TV set and programme when a widescreen film is watched on a standard TV,
or a standard broadcast is viewed on a widescreen set, the receiver includes the WIDE key.So long as
the receiver has been correctly set up for the TV set connected, a widescreen programme will always
be displayed correctly on a widescreen set, and a standard format programme will correctly fill the
screen of a standard format TV.
With a widescreen TV set displaying a standard format programme the WIDE key switches between
displaying the picture with black bars down the sides, and enlarging the picture so that it fills the whole
width of the screen but the top and bottom are cropped off.With a standard format TV displaying a
widescreen programme, the WIDE key switches between displaying the picture with black bars at the
top and bottom of the screen, and filling the whole height of the screen but cropping the sides off
according to instructions broadcast with the programme (called 'pan and scan').The effect of the WIDE
key on the picture display is cancelled by pressing WIDE again.
NOTE:
Sometimes the TV will automatically try and compensate for an incorrect screen format, in this
instance set the tv to the correct format whilst viewing the programme.
8. TROUBLE SHOOTING GUIDE
Problem Possible Reason What to do
The LED indicator
does not glow
Mains cable is
not connected
Check if the main cable is not
plugged into the power socket.
No picture or sound No signal or weak signal.
Check the Aerial and scart
connections
The settings you have made
in the menus have not been
changed.
The digital set-top box was
unplugged without first
going to standby.
Before unplugging your digital set-
top box, make sure it is in standby
The remote control is not
working.
The digital set-top box is in
Stand by.
Remote control is
incorrectly aimed.
Battery exhausted.
Press the standby key.
Check if anything is obstructing the
front panel .
Change the batteries
Password forgotten.
Take contact with the nearest
service center.
Record does not start.
No or weak Aerial 2 input
Signal.
Check Aerial 2 input connection.
No PIP video.
No or weak Aerial 2 input
Signal.
PIP Channel is radio or
teletext based.
Check Aerial 2 input connection.
Use PIP+ / PIP- to choose a valid
TV channel.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDR082 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDR082 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info