499902
26
Zoom out
Zoom in
Previous page
1/33
Next page
EN-25
Connecting to a PictBridge Compatible Printer
Read this section if the model you purchased is included with the PictBridge functions.
If a printer that supports PictBridge is available, images can be printed by connecting the digital
still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your camera.
2. Connect the other end of the USB cable to the USB port on the printer.
3. Turn on your camera.
4. Select [Printer] with the c / d buttons, and press the SCN/SET button.
Printing images
When the camera is properly connected to a PictBridge compliant printer and set to [Printer],
the PictBridge menu is displayed on the monitor.
1. Select the item you want to configure with the c / d
buttons, and press the SCN/SET button.
[Images]:! Select whether you want to print specific
image or all images. You may also select printing
number for specific image.
[Date Print]:! According to the printer type, select
whether you want to print the image with date
imprint or not.
[Paper Size]:! Select the desired paper size
according to the printer type.
[Layout]:!Select the desired printing layout according to the printer type.
[Print]:!After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the figure
shown on the right hand side will appear. Select
[Single], [All], [DPOF] with the c / d buttons, and press
the SCN/SET button.
3. If you select [Single] in the previous step, the figure
shown on the right hand side will appear.
Select the image that you want to print with the e /
f buttons.
Select the [Print Num] (up to 99) with the c / d
buttons.
After selecting the desired image and printing number,
press the
SCN/SET
button to confirm.
4. Select [Print] with the c / d buttons, and press the
SCN/SET button to start printing.
The [COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is finished.
If a print error is detected, the [PRINT ERROR] will
be displayed.
The image printing may be failed if the power to the camera is cut off.
SET:Enter
PictBridge
Images
Images
Date Print
Date Print
Paper Size
Paper Size
Layout
Layout
Print
Print
Next Menu
Next Menu
Off
Off
Default
Default
Default
Default
SET:Enter
00
100-0001
Single
Print Num
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDC-1086E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDC-1086E in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info