505948
18
Zoom out
Zoom in
Previous page
1/28
Next page
- 17 -
NOTE: If you have selected some programmes as
Favourite and Favourite list mode is activated,
only those channels will appear in the EPG.
In EPG Menu, you can easily see the extended help
information by pressing INFO key. If you highlight
an event, short event description, extended event
description, start and finish times of event are
displayed on the screen.
If you press SELECT when a next event is
highlighted, a reminder is set for the highlighted
program and the border colour of the box containing
that events name changes. Program reminders can
be set to signal that a program is about to start
when you are watching another channel. If you set
reminder to a program, then you will be asked for
switching to that channel when the reminder time is
reached. The starting time for EPG is the current
time. You can see the event information for the next
two hours. By pressing RED/ GREEN keys, you
can go to the next hours, and by pressing BLUE/
YELLOW keys, you can reach the event
information for the next days.
MESSAGES
When the box receives no signal (e.g. the aerial cable
is disconnected), NO SIGNAL message is seen on
the screen.
When there is no channel stored in the box, Timer
Menu, Channel Table Menus are not accessible.
Channel navigation is not allowed. Therefore, trying
to enter these menus or do channel navigation will
display First Add new Channels! message on the
screen.
CHANNEL NAVIGATION
There are two ways to navigate through the
channels:
1. Pressing P+/P- keys will help you to go to the next
or the previous channel in the list.
2. Pressing a number key will activate a small digit
entry window on the left upper corner of the screen.
After a digit is entered, the box will wait for 2
seconds till you enter another digit. If no digit is
entered during these 2 seconds, then the box will
switch to the entered number channel.
If a number that is greater than the maximum
number of channels is entered, the box will switch
automatically to the last channel.Each time the box
switches to the desired channel, an information
window is displayed on the lower part of the screen.
The small bar on top right of the banner indicates the
current signal quality.On this channel info window
there are:
· Current event name next event name, and their
start and end times.
· Program mode (TV, Radio, Text, Show All)
· Signal Quality Indicator
· Channel number
· Name of the channel
· An icon indicating that the channel is set as
favourite (if the channel is not set as favourite the
field is left empty)When the info banner is on
screen, If you press [RIGHT] button, the detailed
event information for current and next event is
displayed. If you press [LEFT]button, current
language is displayed. To close the detailed
information window, press i button. When info
banner is active, if the SELECT key is pressed an
EPG window will appear. If you press YELLOW/
BLUE keys Now & Next Information will be seen.
When switching to a locked channel (channel), lock
code is requested via a window as shown in the
picture. Only after the correct code is entered,is it
possible to access to this channel. To skip this
channel, P+/P- cursor keys must be used.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDB65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB65 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info