d) Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation.
If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different from
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
39
1 2
1
2
3
45
English Deutsch Français Italiano
1 Front cover Frontdeckel Courvercle frontal Coperchio anteriore
2 Tool shank Werkzeugschaft Queue d’outil Gambo dell’utensile
3 Tool holder
Werkzeughalter Support d’outil
Supporto dell’utensile
4 Crank cover Kurbeldeckel Courvercle de manivelle Coperchio
dell’incastellatura
5 Side handle Seitengriff Poignée latérale Impugnatura laterale
6 D type handle Handgriff des D-Typs Poignée en D Impugnatura di tipo D
7 Wear limit Verschleißgrenze Limite d’usure Limite d’usura
8 No. of carbon brush Nr. der Kohlebürste No. de balai en carbone N. delle spazzole di
carbone
Nederlands Español Português Ελληνικά
1 Voorzijde Cubierta delantera Tampa frontal Μπροστιν κάλυµµα
2 Boorschacht Barrena Cabo de ferramenta Άξονας εργαλείου
3 Boorhouder Sostén de herramienta Fixador da ferramenta Στήριγµα εργαλείου
4 Bedekking Cubierta del motor Tampa do cárter Κάλυµµα στροφάλου
5 Zijgreep Mango lateral Empunhadura lateral Πλευρική λαβή
6 D-type hendel Mango tipo D Empunhadura do tipo D Λαβή τύπου D
7 Slijtage-limiet Límite de desgaste Limite de desgaste ριο φθοράς
8 Nr. van koolborstel No. de escobilla de Nº da escova de carvão Αρ. Καρβουνακιού
carbón
7mm
17mm
GENERAL SAFETY RULES
WARNING!
Read all instructions
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite the
dust of fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in.
Carrying power tools with your finger on the switch
or plugging in power tools that have the switch
on invites accidents.
71
7
8
English
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling
facility.
Deutsch
Nur für EU-Länder
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Gemäss Europäischer Richtlinie 2002/96/EG über
Elektro- und Elektronik- Altgeräte und Umsetzung
in nationales Recht müssen verbrauchte
Elektrowerkzeuge getrennt gesammelt und einer
umweltgerechten Wiederververtung zugeführt
werden.
Français
Pour les pays européens uniquement
Ne pas jeter les appareils électriques dans les
ordures ménagères!
Conformément à la directive européenne 2002/96/
EG relative aux déchets d’équipements électriques
ou électroniques (DEEE), et à sa transposition dans
la législation nationale, les appareils électriques
doivent être collectés à part et être soumis à un
recyclage respectueux de l’environnement.
Italiano
Solo per Paesi UE
Non gettare le apparecchiature elettriche tra i rifiuti
domestici.
Secondo la Direttiva Europea 2002/96/CE sui rifiuti
di apparecchiature elettriche ed elettroniche e la
sua attuazione in conformità alle norme nazionali,
le apparecchiature elettriche esauste devono
essere raccolte separatamente, al fine di essere
reimpiegate in modo eco-compatibile.
Nederlands
Alleen voor EU-landen
Geef elektrisch gereedschap niet met het huisvuil
mee!
Volgens de Europese richtlijn 2002/96/EG inzake
oude elektrische en elektronische apparaten en de
toepassing daarvan binnen de nationale
wetgeving, dient gebruikt elektrisch gereedschap
gescheiden te worden ingezameld en te worden
afgevoerd naar een recycle bedrijf dat voldoet aan
de geldende milieu-eisen.
Español
Sólo para países de la Unión Europea
¡No deseche los aparatos eléctricos junto con los
residuos domésticos!
De conformidad con la Directiva Europea 2002/96/
CE sobre residuos de aparatos eléctricos y
electrónicos y su aplicación de acuerdo con la
legislación nacional, las herramientas eléctricas
cuya vida útil haya llegado a su fin se deberán
recoger por separado y trasladar a una planta de
reciclaje que cumpla con las exigencias
ecológicas.
Português
Apenas para países da UE
Não deite ferramentas eléctricas no lixo
doméstico!
De acordo com a directiva europeia 2002/96/CE
sobre ferramentas eléctricas e electrónicas usadas
e a transposição para as leis nacionais, as
ferramentas eléctricas usadas devem ser
recolhidas em separado e encaminhadas a uma
instalação de reciclagem dos materiais ecológica.
EÏÏËvÈο
Mfivo ÁÈ· ÙȘ ¯ÒÚ˜ Ù˘ EE
MËv Âٿ٠ٷ ËÏÂÎÙÚÈο ÂÚÁ·Ï›· ÛÙov ο‰o
oÈÎÈ·ÎÒv ·oÚÚÈÌÌ¿Ùˆv!
™‡Ìʈv· Ì ÙËv ÂuÚˆ·˚΋ o‰ËÁ›· 2002/96/EK ÂÚ›
ËÏÂÎÙÚÈÎÒv Î·È ËÏÂÎÙÚovÈÎÒv ÛuÛÎÂuÒv Î·È ÙËv
Âvۈ̿وۋ Ù˘ ÛÙo ÂıvÈÎfi ‰›Î·Èo, Ù· ËÏÂÎÙÚÈο
ÂÚÁ·Ï›· Ú¤ÂÈ v· ÛuÏϤÁovÙ·È Í¯ˆÚÈÛÙ¿ Î·È v·
ÂÈÛÙÚ¤ÊovÙ·È ÁÈ· ·v·Î‡ÎψÛË Ì ÙÚfio ÊÈÏÈÎfi Úo˜
Ùo ÂÚÈ‚¿ÏÏov.
