Manual Hitachi g 14 dsl (page 10 of 76) (English, German, Dutch, French, Italian, Portuguese, Spanish)

391330

Zoom out

Zoom in

1/76

English

Charger

SPECIFICATIONS

Cordless disc grinder

Model G14DSL G18DSL

Voltage 14.4 V 18 V

Rated speed 9300 min

-1

9100 min

-1

Wheel

outer dia. × hole dia. 115 × 22.23 mm

peripheral speed 80 m/s

Rechargeable battery BSL1430: Li-ion 14.4 V BSL1830: Li-ion 18 V

(3.0 Ah, 8 cells) (3.0 Ah, 10 cells)

Weight 1.7 kg 1.8 kg

1 Depressed center wheel ........ 1

G14DSL

2 Wrench ..................................... 1

(2LSCK)

3 Side handle ............................. 1

G18DSL

4 Charger ..................................... 1

(2LSCK)

5 Battery ...................................... 2

6 Plastic case .............................. 1

7 Battery cover ........................... 1

G14DSL (NN) Without charger, battery, plastic

G18DSL (NN) case and battery cover

STANDARD ACCESSORIES

Standard accessories are subject to change without

notice.

APPLICATIONS

⅜ Removal of casting fin and finishing of various

types of steel, bronze and aluminum materials and

castings.

⅜ Grinding of welded sections or sections cut by

means of a cutting torch.

⅜ Grinding of synthetic resins, slate, brick, marble, etc.

⅜ Cutting of synthetic concrete, stone, brick, marble,

and similar materials.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the handle tightly and push the battery latch

to remove the battery (See Fig. 1 and 2).

CAUTION

Never short-circuit the battery.

Model UC18YRSL

Charging voltage 14.4 V 18 V

Weight 0.6 kg

2. Battery installation

Insert the battery while observing its polarities (See

Fig. 2).

CHARGING

Before using the power tool, charge the battery as follows.

1. Connect the charger’s power cord to a receptacle.

When the power cord is connected, the charger’s

pilot lamp will blink in red. (At 1-second intervals)

2. Insert the battery into the charger.

Firmly insert the battery into the charger until the

line is visible, as shown in Fig. 3, 4.

3. Charging

When inserting a battery in the charger, charging

will commence and the pilot lamp will light

continuously in red.

When the battery becomes fully recharged, the pilot

lamp will blink in red. (At 1-second intervals) (See

Table 1)

(1) Pilot lamp indication

The indications of the pilot lamp will be as shown

in Table 1, according to the condition of the charger

or the rechargeable battery.

⅜ Do not place electrically conductive cuttings, nails,

steel wire, copper wire or other wire in the storage

case.

⅜ Either install the battery in the power tool or

store by securely pressing into the battery cover

until the ventilation holes are concealed to prevent

short-circuits. (See Fig. 1)

01Eng_G14DSL_WE 8/20/12, 11:319

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi g 14 dsl in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi g 14 dsl Manual

Product: