Manual Hitachi EC 6B (page 11 of 44) (English, French, Spanish)

597522

Zoom out

Zoom in

1/44

— 11 —

English

Joint

Pressure gauge

Knob of the pressure reducer

Knob of the pressure switch

Fig. 4

3. Shutdown

(1) Turn the knob of the pressure switch to “OFF”. (Fig. 1)

(2) Unplug the plug from power source.

(3) Open the drain cock located at the lower part of

the tank (Fig. 5).

Tank

Drain cock

Fig. 5

4. About the thermal protector

This item is not necessary if your compressor is not

equipped with the thermal protector reset switch

shown in Fig. 6.

The thermal protector operates to stop the motor

when a problem such as a motor overload, etc.,

occurs. If the motor should stop during operation,

proceed as follows.

(1) Turn the pressure switch knob to the OFF position

(Fig. 1) and disconnect the plug from the

receptacle.

(2) If the extension cord does not conform to the

specifications given on page 6, replace with an

extension cord such as that shown on page 6. If

the capacity of the power supply is insufficient,

increase the power supply capacity to remove the

cause of a flow of excessive current (over-current).

(3) Wait approximately 5 minutes, then press the

reset switch of the thermal protector (Fig. 6).

(4) Start up. If the motor still stops during operation,

please contact the service center.

MAINTENANCE

WARNING:

Disconnect the compressor from the

power source and remove the

compressed air from the air tank

before performing the maintenance

operations.

1. Cleaning the intake filter

Remove the intake filter (Refer to Fig. 1.) every 50

hours or once a week and clean the inside of the

intake filter and the filter element with compressed air.

(Fig. 7)

Use a phillips screwdriver to disassemble intake filter

models EC6B, EC6C and EC12. Use an allen wrench to

disassemble model EC16.

WARNING: Never clean filter element with a

flammable liquid or solvent.

Reset switch of thermal protector

(EC6B)

(EC6C)

(EC12)

(EC16)

Fig. 6

()

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi EC 6B in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi EC 6B Manual

Product: