597520
10
Zoom out
Zoom in
Previous page
1/18
Next page
— 10 —
Fig. 5
3. Shutdown
(1) Push the knob of the pressure switch to OFF
(Refer to Fig. 1 and Fig. 2).
(2) Unplug the plug from power source.
(3) Open the drain cock located at the lower part of
the tank (Fig. 6).
MAINTENANCE
WARNING:
Disconnect the compressor from the
power source and remove the
compressed air from the air tank
before performing the maintenance
operations. Allow the compressor to
cool before performing the
maintenance operations.
1. Cleaning the intake filter
Remove the intake filter (Refer to Fig. 1) every 50
hours or once a week and clean the inside of the
intake filter and the filter element with compressed air
(Fig. 7).
Use a phillips screwdriver to disassemble intake filter.
WARNING: Never clean filter element with a
flammable liquid or solvent.
CAUTION : Do not operate without the intake
filter.
Fig. 7
NOTE: Replace the filter element when it becomes dirty.
2. Draining tank
Drain tank daily or after 4 hours of use. Open drain
fitting and tilt compressor to empty accumulated
water (Refer to Fig. 6).
3. Oil change-oil topping off
(Only for EC12)
CAUTION : Overfilling with oil will cause
premature compressor failure. Do not
overfill.
(1) Within the first 50 hours of operation, completely
replace the oil of the pumping element. Unfasten
the oil drain cap on the casing cover, drain all the
oil, and screw the cap back on (Refer to Fig. 8 ).
EC 10SB(SL)
EC 12
Knob of the
pressure switch
Pressure gauge (A)
indicates the pressure
in the air tank
Pressure gauge (B)
indicates the working
pressure
Knob of the pressure reducer
Knob of the pressure switch
Knob of the
pressure
reducer
Pressure gauge (A)
indicates the pressure
in the air tank
Pressure gauge (B)
indicates the working
pressure
Tank
Drain cock
Fig. 6
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi EC 10SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi EC 10SL in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info