604695
38
Zoom out
Zoom in
Previous page
1/119
Next page
38
5
Gently push the section indicated PUSH/
CLOSE on the cover of disc insertion block
(hand strap), to close the cover.
6
Turn the DVD video camera/recorder on.
Set the power switch to
VIDEO or
PHOTO: An image will appear in the view-
finder and disc recognition will start.
Note: If the disc is forcibly inserted from the wrong
direction, the DVD video camera/recorder, or car-
tridge or caddy could be damaged.
Note: When using a one-sided recordable disc,
insert it with the recording surface facing the in-
side of DVD video camera/recorder.
When using DVD-RAM disc
The subject image will appear in the viewfinder or
on LCD screen, and the DVD video camera/re-
corder will start to recognise the disc. Subsequently,
the DVD video camera/recorder will enter the re-
cording pause status.
When using DVD-R disc
Recognition of the disc will
start.
When you use a brand-new
disc, the messages on the
right will appear in se-
quence by pressing the
button between messages.
When recording on
this DVD video cam-
era/recorder:
When message Format the
disc now? appears, choose
YES and then press the
button. The disc will
be automatically formatted
for use on this DVD video
camera/recorder.
After formatting, message
DVD-R disc, Video mode
cannot be changed will
appear (see page 26): Press
the
button to erase the
message.
Once formatted, a DVD-R disc can no longer be
changed to a disc for PC, even if it has not been
recorded on this DVD video camera/recorder.
When recording data from PC:
While the above messages are being displayed,
press the
button, or when message Format the
disc now? appears, choose NO and then press
the
button.
However, if data from PC has not yet been recorded,
the disc can be made usable on this DVD video cam-
era/recorder. When inserting the disc into this DVD
video camera/recorder, the same message will ap-
pear: If you wish to use it on this DVD video cam-
era/recorder, choose YES.
Note: It will take more time than usual after the
disc is inserted before recording can begin in the
following cases:
When the cover of disc insertion block is open
When the date changes (first recording of a day)
When the temperature has changed greatly
from the previous recording status
When a disc with scratches, dirt or fingerprints is
inserted
Note: If the following discs are inserted, the Disc
Navigation screen will appear or some message
will be displayed:
Disc with little remaining free space
Write-protected disc
Finalised DVD-R disc
Disc recorded on another device
Unknown type of disc
Record-
ing
pause
(In case of movie)
DZ-MV238/208E(AU)P30-53 02.4.25, 5:20 PM38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZMV238EAU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZMV238EAU in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info