604696
101
Zoom out
Zoom in
Previous page
1/119
Next page
101
Message Cause & Troubleshooting
Reference
page
Cannot delete scenes.
Scene without control
info. Update control
information.
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
Disc error has oc-
curred. Format the
disc now?
Disc error has oc-
curred. Formatting is
not complete.
Disc error has oc-
curred. Keep disc in-
side & restart.
Disc full. Cannot ex-
ecute.
Drive overheat. Please
retry later.
Stop processing
This may occur when scene that was edited for divi-
sion, etc. is to be deleted.
Combine the divided scenes, and then delete them.
The thumbnail at the start of programme or play list
may not appear when disc edited on device other than
this DVD video camera/recorder is used, or, when edit-
ing, such as combining, is performed on this DVD video
camera/recorder. Choose YES on screen for verifica-
tion.
If thumbnail information is insufficient, Disc Navigation
will automatically create thumbnails after it starts.
The number of entered scenes has reached the limit
that can be entered, so the control information for gen-
erating thumbnails cannot be added.
Combine several scenes or delete them.
Has the disc been initialised on a PC?
Choose YES and initialise the disc when using it on
this DVD video camera/recorder.
Has the disc been initialised on PC? Has initialising the
disc on PC been interrupted?
Choose YES and initialise the disc when using it on
this DVD video camera/recorder.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. be-
fore reusing it, or use another disc.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc
being used in it, connect AC adapter, and then power
the DVD video camera/recorder again. Repair of
scenes will be tried.
If this message appears during recording, turn off the
DVD video camera/recorder with the disc loaded, and
then turn it on again. After that, operate the DVD video
camera/recorder following the instructions on screen.
If the battery is being used to power the DVD video
camera/recorder, the message Use AC adapter. will
appear. If an AC adapter is not handy, press the stop
(
) button, and then remove the disc. If the disc is
inserted when the AC adapter is later used to power
the DVD video camera/recorder, the data may be
repaired.
Delete unnecessary scenes before using this disc, or use
another disc.
The temperature inside the DVD video camera/re-
corder is too high, and reading or writing of the data
on disc may not be performed normally.
Turn the DVD video camera/recorder off and wait for
a while. The temperature will be effectively decreased
if the DVD video camera/recorder is placed in a well-
ventilated spot.
The
button was pressed to stop processing of multi-
ple scenes.
84
78, 79
88
88
23
40
81
40
75
DZ-MV238/208E(AU)P91-104 02.4.25, 5:24 PM101
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZMV208EAU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZMV208EAU in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info