604699
96
Zoom out
Zoom in
Previous page
1/114
Next page
96
English
Connecting DVD video camera/recorder to PC via PC connection cable
Use the PC connection cable supplied with the DZ-WINPC3(W) optional PC kit to connect the DVD
video camera/recorder to a PC that has been turned off, as shown in the following illustration:
Note: Use the USB device driver provided with the
DVD video camera/recorder, not with the
DZ-WINPC3(W).
Note: When connecting this DVD video camera/
recorder to PC, you can also use a mini-USB B con-
nector 5-pin type cable that is compatible with
USB2.0 (generally available), as well as the PC
connection cable.
Note: The PC connection cable does not supply
power to the DVD video camera/recorder. Use the
AC adapter to power the DVD video camera/re-
corder.
Note: The PC connection cable supplied with the
DZ-WINPC3(W) optional PC kit is to be exclusively
used with the DVD video camera/recorder: A gen-
erally available USB cable cannot be used.
Note: Before connecting DVD video camera/re-
corder to PC, disconnect any other cables, such
as AV input/output cable, from the DVD video
camera/recorder.
Note: If you connect this DVD video camera/re-
corder to PC, nothing will appear in the viewfinder
or on the LCD screen. The CHARGE/ACCESS indi-
cator will blink only while the disc is being
accessed.
Note: If you wish to transfer data recorded on
DVD-R disc with this DVD video camera/recorder
to PC, finalize the DVD-R disc (see page 89).
Note: After transferring the data on disc to PC,
keep the original disc as your backup.
To PC connection terminal
Note: When capturing for PC the video data in-
put from another AV device and recorded on disc
in DVD video camera/recorder, note that data
may not be played back correctly.
Note: The DVD video camera/recorder con-
nected to PC should be used at normal room tem-
perature.
Note: Note that Hitachi does not guarantee op-
eration in the following cases:
If connection is made using a cable other than
that supplied with the DZ-WINPC3(W) PC kit
Note: Connect the DVD video camera/recorder
to PC and use it at room temperature.
Note: Take care that the temperature of this DVD
video camera/recorder, when connected to PC,
does not rise excessively (r eference for usage:
approx. 30 minutes at about 86°F(30°C).
Note: If you use a PC equipped with DVD-RAM
drive, change the provided UDF file system to the
UDF2.01 file system included in the DZ-WINPC3(W)
PC kit.
Note: If the DVD video camera/recorder is con-
nected to the USB1.1 port of PC, the data transfer
speed will be lower than when it is connected to
USB2.0 port.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-MV270A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-MV270A in the language / languages: English as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info