65762
143
Zoom out
Zoom in
Previous page
1/161
Next page
English
143
*1
This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognised immediately after it is inserted, do not repair the disc; remove it and then use the
provided disc cleaning cloth to clean off the dirt before using it.
This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
If the repair message appears when you turn the DVD video camera/recorder on from off with a
disc loaded after recording on it, choose repair.
If the repair message appears when recording and playback are normally possible with another
disc – and no condensation occurs and the disc is not dirty – choose repair.
*2
This message may also appear when dirt adheres to disc. In this case, do not initialise the disc:
Remove it and then use the provided disc cleaning cloth to clean off the dirt before using it.
This message may also appear when condensation occurs. In this case, do not initialise the disc;
turn the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
Initialisation will delete all data on disc.
*3
This message may also appear when dirt adheres to disc. Remove the disc and then use the
provided disc cleaning cloth to clean off the dirt before using it.
This message may also appear when condensation occurs. Wait until the DVD video camera/
recorder dries out, and then turn it on again.
*4
This message will appear when a single-sided disc is inserted in reverse. Reinsert the disc correctly.
(Insert the disc with the label printed surface facing the outside.)
*5
Do not insert a DVD-RW (VF-mode)/DVD-R that has not been finalised into any DVD recorder:
The disc may be unusable.
This DVD is recorded by
the NTSC system.
Please replace DVD.
This DVD video camera/recorder can use only discs recorded on
the PAL system. A disc recorded on the NTSC system cannot be
used on this DVD video camera/recorder.
UNFORMAT DVD The disc is not initialised or it is damaged.
If this message appears, be sure to initialise the disc on this DVD
video camera/recorder before using it.
Reinitialising even a disc used on this DVD video camera/
recorder may be necessary (initialising will erase all recorded
contents on disc). If this message appears, try to initialise the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
105
See *2 on this page. 12
UNFORMAT HDD The HDD may not be initialized, or it may be destroyed.
Use AC adapter/
charger.
No dubbing, HDD deletion, or disc finalisation is possible with a
battery: Use the AC adapter/charger.
29, 83, 107,
108
Use AC adapter/
charger.
Tur n off powe r.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
29
Write protected.
Check card.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
28
Write protected.
Check HDD/DVD.
The HDD or disc is write-protected. Use the Disc Navigation
menu to release the protection.
106
Message Cause & Troubleshooting
Reference
page
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-HS300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-HS300 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi DZ-HS300

Hitachi DZ-HS300 User Manual - German - 161 pages

Hitachi DZ-HS300 User Manual - Dutch - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info