596346
35
Zoom out
Zoom in
Previous page
1/166
Next page
English
35
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory (p. 147)). (Note, however, that
the date/time will not be reset.)
1Choose “Reset” on the
“Initial Setup” menu
screen, and then press
the A button.
The screen for verifying reset will appear.
2If you are sure that you
wish to reset, use the
d button to choose
“YES”, and then press
the A button.
The setting items have now been reset to
defaults.
Note:
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the C button.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select “On” or “Off”, and
then press the A button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
Note:
The Record LED setting will not appear in the on-
screen information display.
The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
Even if “Record LED Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING SETTING OF DEMONSTRATION
1Press the MENU
button, choose “Initial
Setup”, “Demo Mode”,
and then press the A
button.
2Press the f or e button to choose the
desired option, and then press the A
button.
3Press the MENU button again to exit setting.
Note:
Pressing the C (STOP/EXIT) or DISC NAVIGATION
button will exit demonstration.
If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “O” or
N”, or a card is loaded with the power switch set to
P”.
The demonstration function will not work when the
DVD video camera/recorder is connected to PC (DZ-
GX3300A/GX3200A/GX3100A only).
While the demonstration is being given, the recording
indicator will blink.
Record LED
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Ini t ial Setup
On
Off
On
English
Auto
ENTER
Reset?
YES NO
Reset
Record LED
On
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Ini t ial Setup
On
Of f
Auto: To start demonstration if the DVD
video camera/recorder is inactive for
approx. 3 minutes after it is turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
ENTER RETURN
Demo Mode
Reset
Record LED
Power Save
Beep
Language
Ini t ial Setup
Auto
Off
Start
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-GX3100A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-GX3100A in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info