596341
138
Zoom out
Zoom in
Previous page
1/157
Next page
English
138
No DVD Video Camera/Recorder Operation –
Check the Following:
Check 1 No movie can be recorded
Movie can be recorded only on disc.
Check the following:
Is proper type of disc inserted?
Is power switch set to “!”?
Is the DVD-RAM/DVD-RW (VR-mode) disc in
DVD video camera/recorder write-protected?
Release the write-protect.
When using DVD-RW (VF-mode)/DVD-R disc:
Has the disc been finalised?
Does disc have remaining recording space?
If movie still cannot be recorded after the above
check is clear, the disc may be damaged: Use
another disc.
Check 2 No still can be recorded
Still can be recorded only on DVD-RAM disc or SD
memory card.
Check the following:
Is proper type of disc or card inserted?
Is power switch set to match the recording
medium?
When using DVD-RAM disc: Set to “ ”.
If the LOCK switch on this DVD video camera/
recorder is set to (upper position), set it to
(lower position).
If the LOCK switch is set to (upper position),
switching to “ ” is not possible.
When using SD memory card: Set to “"”.
Is loaded DVD-RAM disc write-protected?
When using SD memory card: Is the erase
prevention switch locked? (p. 27)
Does disc or card have remaining recording
space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: Use
another disc or card.
Check 3
Skip or search playback does
not work well
If the temperature inside the DVD video camera/
recorder is high, normal operation may not be
possible. Turn the DVD video camera/recorder off,
wait for a few moments, and then turn it on again
for operation.
Check 4
No operation can be
performed because the
ACCESS or CARD ACCESS
indicator on this DVD video
camera/recorder remains lit
or blinking.
After disc or card is
inserted, it takes some time
until recording is possible.
In the following cases, it will take more time than
usual until operation is possible:
Immediately after a disc or card is reinserted.
When a long time has elapsed since the DVD
video camera/recorder was turned off last.
When the temperature is greatly different from
the status of previous recording.
When disc with scratches, dirt or fingerprints is
inserted.
When disc is subject to severe vibrations.
When the battery or DC power cord was
disconnected instead of following the correct
procedure using power switch to turn the DVD
video camera/recorder off.
Check 5
No DVD video camera/recorder
operation
Is a fully charged battery attached?
Is the DVD video camera/recorder powered from
AC outlet?
Check 6 No image in viewfinder
Is LCD monitor open?
No image will appear in viewfinder unless the LCD
monitor is closed and securely locked to DVD
video camera/recorder.
Check 7
No image appears on the LCD
screen or in the viewfinder
Does DVD video camera/recorder stop at the
end of the scene to which wipe-out was set and
played back?
Press the DISC NAVIGATION button.
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-BX31E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-BX31E in the language / languages: English as an attachment in your email.

The manual is 7,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info