596334
153
Zoom out
Zoom in
Previous page
1/183
Next page
153
Additional Information
Do not store the camcorder in a place subject to strong magnetism or
intense vibrations.
This could cause malfunctions.
z Cleaning
Be sure to set the power switch to “OFF” before cleaning the camcorder.
Cleaning the LCD monitor
Use dry, soft cloth to wipe dirt off. When cleaning the LCD monitor, be careful not to
use force, scratch it, or subject it to impact. Doing such could cause a defect in the
LCD monitor, result in display unevenness, or damage the LCD monitor.
Cleaning the surface of the camcorder
Do not wipe the surface of the camcorder hard with any foreign object, such as grit
adhering to the camcorder, and do not use rough fabrics to clean the surface of the
camcorder. Doing so could scratch it.
Use soft cloth to gently wipe dirt off the surface of the camcorder.
If dust adheres to the viewfinder lens, remove it using a cotton swab. Do not rub the
lens with force. Doing so could scratch the lens.
Do not use benzene or thinner to clean the surface of the camcorder.
The coating of the case could peel off or the case could deteriorate. Wipe off dirt on the
case with a soft cloth which has been completely wrung out. When using chemical
cleaning cloth, follow instructions for use.
z Handling HDD/Discs
Using HDD/discs
Do not do the following when the ACCESS/PC indicator is lit:
shake or subject the camcorder to impacts, or open/close the LCD monitor
cut the power, or remove the battery or AC adapter
remove the recording media.
As the ACCESS/PC indicator will remain lit for a while after concluding recording,
please continue to observe the above precautions while the indicator is lit.
While using HDD/BD/DVD, if the power is cut accidentally while the ACCESS/PC
indicator is lit or flashing, connect the AC adapter and then turn on the power again.
When using a BD/DVD, turn the power back on while the BD/DVD is loaded in the
camcorder. The HDD/BD/DVD will be restored. (p.132)
Use a disc which is not dirty, scratched, or warped. (BD/DVD)
A Hitachi Maxell disc is recommended. (BD/DVD)
If there is concern that the camcorder may be subjected to large vibrations or impact
during transport, remove the BD/DVD and protect the camcorder using soft protective
materials.
When the camcorder is subjected to an impact while a BD/DVD disc is loaded, a mark
may form on the disc surface due to the impact protection function for the disc and
pickup. This mark can be wiped off using a disc cleaning cloth.
Be careful when removing the disc since the metal of removal slot of camcorder, and
disc itself, may be hot.
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-BD70A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-BD70A in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info