596334
148
Zoom out
Zoom in
Previous page
1/183
Next page
148
Additional Information
The remote control
does not operate.
Do you operate the remote control toward the remote
control receiver of the camcorder?
16
If the camcorder’s remote control receiver is exposed to
strong light such as direct sunshine or fluorescent light,
the remote control does not work.
Adjust the position or angle of the camcorder.
Is the lithium battery inserted in the remote control?
Check that the polarization of the lithium battery is
correctly set.
The lithium battery may be empty. Replace the battery to
a new one.
17
Is the camcorder powered on? If not, turn on the
camcorder.
22
Disc cover cannot be
closed.
Is the disc correctly inserted?
Remove the disc and then reinsert it.
33
Connect a fully charged battery or AC adapter/charger,
and then turn the camcorder on and try again.
21, 37
Operating noise is
heard.
This is not a fault. A quiet operating sound is heard as the
disc rotates during recording or playback, etc.
Some vibrations are
felt or slight sound is
heard from
mechanism.
These vibrations or sound are caused by HDD/disc drive.
This does not indicate a fault.
No operation can
be performed
because the
ACCESS/PC or
CARD ACCESS
indicator on this
camcorder remains
lit or flashing.
After a disc or
card is inserted, it
takes some time
until recording is
possible.
In the following cases, it will take more time than usual
until operation is possible:
Immediately after a disc or card is inserted.
When a long time has elapsed since the camcorder was
turned off last.
When the temperature is greatly different from the
status of previous recording.
When a scratched or dirty disc is inserted.
When the camcorder is subjected to strong vibrations.
When the battery or DC power cord was disconnected
before turning the power switch off.
No image in the
viewfinder.
Is the LCD monitor open?
No image will appear in the viewfinder unless the LCD
monitor is closed (default setting). You can change this
setting.
Is the camcorder set to the sleep mode?
Press QUICK START to release sleep mode.
20, 40
Symptom Cause and Correction
Reference
page
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-BD70A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-BD70A in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info