596336
53
Zoom out
Zoom in
Previous page
1/121
Next page
53
Various Recording Techniques
Selecting a flash mode
Turning Off/On the
recording indicator
1
During recording pause, press
MENU.
2
Select “Camera Functions
Setup” “Flash” a flash
mode
3
Press the confirmation button
to confirm, then MENU to end.
The flash setting is retained in
memory even when the power
is turned off.
Hints
There may be cases when the
recorded pictures are out-of-focus in
dark places even if the flash is used.
” flashes in the LCD monitor
while the flash is recharging and
the flash will not fire.
If the subject is too close, image
smearing may occur.
Notes
When a conversion lens is attached,
adjust the “Flash” setting to “Off”.
Although the flash range differs
according to the subject, as a
reference, its range is about 3.2–8.2
feet (1–2.5 m) in dark places.
Although the amount of light emitted
will automatically be adjusted at
time of emission, the flash may not
be sufficiently adjusted if the
distance to the subject is too distant
or too near.
When recording consecutive shots
using the flash, the flash may not fire
or the amount of light emitted may
not be sufficiently adjusted.
Do not emit the flash close up in
front of a person’s eyes.
Turning Off the
Recording Indicator
Beneath the Lens
You can turn the indicator off when
recording through reflective objects
such as glass or a fish tank, etc., so its
reflection is not recorded.
1
During recording pause, press
MENU.
2
Select “Initial Setup”
“Record LED” “On”/”Off
3
Press the confirmation button
to confirm, then MENU to end.
The recording indicator setting
is not displayed in the on-
screen information.
Even if the recording indicator
is set to “Off”, it will still light
while the self-timer is counting
down (p.55).
Do not fire the flash at the driver/
rider of a moving vehicle or bicycle,
etc.
Do not use the flash in locations
where flammable or combustible gas
is present. Doing so may cause the
gas to ignite or explode.
HDD
BD-R
RAM
-RW (VR) R-RW (VF)
BD-RE
CARD
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DZ-BD10HA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DZ-BD10HA in the language / languages: English as an attachment in your email.

The manual is 13,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info