566559
9
Zoom out
Zoom in
Previous page
1/76
Next page
English
9
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid
contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a quali ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in rm persons away.
When not in use, tools should be
stored out of reach of
children and in rm persons.
PRECAUTIONS FOR CORDLESS IMPACT
DRIVER DRILL
1. Always charge the battery at a temperature of 0°C 50°C.
A temperature of less than 0°C will result in over charging
which is dangerous. The battery cannot be charged at a
temperature higher than 50°C.
The most suitable temperature for charging is that of
20°C 25°C.
2. When
one charging is completed, leave the charger for
about 15 minutes before the next charging of battery.
Do not charge more than two batteries consecutively.
3. Do not allow foreign matter to enter the hole for connecting
the rechargeable battery.
4. Never disassemble the rechargeable battery and
charger.
5. Never short-circuit the
rechargeable battery. Short-
circuiting the battery will cause a great electric current
and overheat. It results in burn or damage to the battery.
6. Do not dispose of the battery inre.
If the battery is burnt, it may explode.
7. When drilling in wall,oor or ceiling, check for buried
electric
power cord, etc.
8. Bring the battery to the shop from which it was purchased
as soon as the post-charging battery life becomes too
short for practical use. Do not dispose of the exhausted
battery.
9. Using an exhausted battery will damage the charger.
10. Do not insert object into the air
ventilation slots of the
charger.
Inserting metal objects or in ammables into the charger
air ventilation slots will result in electrical shock hazard or
damaged charger.
11. Do not move the charger by pulling it by the cord. Doing
so may lead to damage.
12. When mounting a bit into the keyless
chuck, tighten the
sleeve adequately. If the sleeve is not tight, the bit may
slip or fall out, causing injury.
SPECIFICATIONS
POWER TOOL
Model DV14DVF DV18DVF
No-load speed (Low/High) 0 400 / 0 1500 min
-1
0 400 / 0 1500 min
-1
No-load impact rate (Low/High) 0 5600 / 0 21000 min
-1
0 5600 / 0 21000 min
-1
Capacity
Drilling
Brick
(Depth 30 mm)
13 mm 13 mm
Wood
(Thickness 18 mm)
32 mm 38 mm
Metal
(Thickness 1.6 mm)
13 mm 13 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
Rechargeable battery
EB1414S: Ni-Cd 14.4 V (1.4 Ah 12 cells)
BCC1412: Ni-Cd 14.4 V (1.2 Ah 12 cells)
EB1814SL: Ni-Cd 18 V (1.4 Ah 15 cells)
BCC1812: Ni-Cd 18 V (1.2 Ah 15 cells)
Weight
1.8 kg 1.9 kg
CHARGER
Model UC18YK / UC18YG
Charging voltage 7.2 18 V
Weight 0.3 kg
000Book_DV14DVF_Tha.indb 9000Book_DV14DVF_Tha.indb 9 2010/04/06 17:39:082010/04/06 17:39:08
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV18DVF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV18DVF in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info