Manual Hitachi DV18DSDL (page 9 of 92) (English, German, Dutch, French, Italian, Portuguese, Spanish)

566537

Zoom out

Zoom in

1/92

English

11. Bring the battery to the shop from which it was

purchased as soon as the post-charging battery life

becomes too short for practical use. Do not dispose

of the exhausted battery.

12. Using an exhausted battery will damage the charger.

13. Do not insert object into the air ventilation slots of

the charger.

Inserting metal objects or inflammables into the

charger air ventilation slots will result in electrical

shock hazard or damaged charger.

14. When mounting a bit into the keyless chuck, tighten

the sleeve adequately. If the sleeve is not tight, the

bit may slip or fall out, causing injury.

15. This product contains a strong permanent magnet

in the motor.

Observe the following precautions regarding

adhering of chips to the tool and the effect of the

permanent magnet on electronic devices.

CAUTION:

⅜ Do not place the tool on a workbench or work area

where metal chips are present.

The chips may adhere to the tool, resulting in injury

or malfunction.

⅜

If chips have adhered to the tool, do not touch it.

Remove the chips with a brush.

Failure to do so may result in injury.

⅜

If you use a pacemaker or other electronic medical

device, do not operate or approach the tool.

Operation of the electronic device may be affected.

⅜ Do not use the tool in the vicinity of precision

devices such as cell phones, magnetic cards or

electronic memory media.

Doing so may lead to misoperation, malfunction or

loss of data.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips

with the protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor

may stop. This is not the trouble but the result of

protection function.

1. When the battery power remaining runs out, the

motor stops.

In such case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes

of overloading. After that, you can use it again.

3. If the battery is overheated under overload work,

the battery power may stop.

In this case, stop using the battery and let the battery

cool. After that, you can use it again.

Furthermore, please heed the following warning and

caution.

WARNING:

In order to prevent any battery leakage, heat generation,

smoke emission, explosion and ignition beforehand,

please be sure to heed the following precautions.

1. Make sure that swarf and dust do not collect on

the battery.

⅜ During work make sure that swarf and dust do

not fall on the battery.

⅜ Make sure that any swarf and dust falling on the

power tool during work do not collect on the

battery.

⅜ Do not store an unused battery in a location

exposed to swarf and dust.

⅜ Before storing a battery, remove any swarf and

dust that may adhere to it and do not store it

together with metal parts (screws, nails, etc.).

2. Do not pierce battery with a sharp object such as

a nail, strike with a hammer, step on, throw or

subject the battery to severe physical shock.

Do not use an apparently damaged or deformed

battery.

4. Do not use the battery in reverse polarity.

5. Do not connect directly to an electrical outlets or

car cigarette lighter sockets.

6. Do not use the battery for a purpose other than

those specified.

7. If the battery charging fails to complete even

when a specified recharging time has elapsed,

immediately stop further recharging.

8. Do not put or subject the battery to high

temperatures or high pressure such as into a

microwave oven, dryer, or high pressure

container.

9. Keep away from fire immediately when leakage

or foul odor are detected.

10. Do not use in a location where strong static

electricity generates.

11. If there is battery leakage, foul odor, heat

generated, discolored or deformed, or in any

way appears abnormal during use, recharging or

storage, immediately remove it from the

equipment or battery charger, and stop use.

CAUTION:

1. If liquid leaking from the battery gets into your

eyes, do not rub your eyes and wash them well

with fresh clean water such as tap water and

contact a doctor immediately.

If left untreated, the liquid may cause eye-

problems.

2. If liquid leaks onto your skin or clothes, wash

well with clean water such as tap water

immediately.

There is a possibility that this can cause skin

irritation.

3. If you find rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when

using the battery for the first time, do not use and

return it to your supplier or vendor.

WARNING:

If a conductive foreign matter enters in the terminal of

lithium ion battery, the battery may be shorted, causing

fire. . When storing the lithium ion battery, obey surely

the rules of following contents.

⅜ Do not place conductive debris, nail and wires

such as iron wire and copper wire in the storage

case.

⅜ To prevent shorting from occurring, load the

battery in the tool or insert securely the battery

cover for storing until the ventilator is not seen.

01Eng_DS14DSDL_WE.p65 1/24/12, 10:18 AM8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV18DSDL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DV18DSDL Manual

Product: