566561
48
Zoom out
Zoom in
Previous page
1/78
Next page
Español
47
Lo accesorios facultativos están sujetos a cambio sin
previo aviso.
APLICACIÓN
Taladrado de un ladrillo, bloque de hormigón, etc.
Atornillamiento y desatornillamiento de tornillos para
metales, tornillos para madera, tornillos que no
necesitan abrir antes su agujero, etc.
Taladrado de varios metales
Taladrado de varias maderas
DESMONTAJE E INSTALACIÓN DE LA
BATERIA
1. Desmontaje de la batería
Sujetar firmemente el asidero y presionar el cierre
de la bataría (2 pzas) para desmontarla (Ver las Figs.
1 y 2).
PRECAUCIÓN
No cortocircuitar nunca la batería.
2. Instalación de la batería
Insertar la batería observando sus polaridades (ver
la Fig. 2).
CARGA
UC18YRL
Antes de utilizar la herramienta eléctrica, cambie la
batería de la siguiente manera.
1. Enchufe el cable de alimentación del cargador a un
tomacorriente de CA
Cuando haya conectado el enchufe del cargador a
una toma de la red, la lámpara piloto se encendrá
en rojo (A intervalos de 1 segundo).
2. Inserte la batería en el cargador.
Introduzca la batería firmemente hasta que entre en
contacto con el fondo del compartimiento del
cargador.
PRECAUCIÓN
Si inserta la batería al revés, no sólo será imposible
cargarlas, sino que también se podrán producir
problemas en el cargador, como la deformación del
terminal de recarga.
3. Carga
Cuando inserte una batería en el cargador, la carga
comenzará la lámpara piloto permanecerá
continuamente encendida en rojo.
Cuando la bateria se haya cargado completamente,
la lámpara piloto parpadeará en rojo (A intervalos
de 1 segundo) (Vea la Tabla 1).
(1) Indicaciones de la lámpara piloto
Las indicaciones de la lámpara piloto mostradas en
la Tabla 1, se producirán de acuerdo con la condición
del cargador o de la batería.
Tabla 1
Indicaciones de la lámpara piloto
Se encenderá durante 0,5 segundos.
No se encenderá durante 0,5 segundos.
(Apagada durante 0,5 segundos)
Iluminación permanente
Se encenderá durante 0,5 segundos.
No se encenderá durante 0,5 segundos.
(Apagada durante 0,5 segundos)
Se encenderá durante 0,1 segundos.
No se encenderá durante 0,1 segundos.
(Apagada durante 0,1 segundos)
Illuminación permanente
Parpadeo
(ROJA)
Durante la
carga
Carga
completa
Iluminación
(ROJA)
Parpadeo
(ROJA)
Antes de la
carga
Espera por
recalentamiento
Iluminación
(VERDE)
Carga
imposible
Parpadeo
(ROJA)
Mal funcionamento de
la batería o del
cargador.
Batería recalentada.
No puede cargarse (la
carga comenzará cuando
la batería se enfríe).
NOTA: Cuando está en espera para que se enfríe la batería, el UC18YRL enfría la batería recalentada mediante
un ventilador de refrigeración.
(2) Temperatura de las baterías
La temperatura de las baterías se muestra en la
tabla siguiente, y las baterías que se hayan calentado
deberán dejarse enfriar durante cierto tiempo antes
de cargarlas.
Tabla 2 Márgenes de carga de las baterías
Chargeur
UC18YRL
Batería
Baterías Ni-Cd –5°C – 55°C
Baterías Ni-MH –5°C – 50°C
Baterías Li-ion 0°C – 50°C
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV18DCL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV18DCL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info