566551

Hitachi DV14DCL2 Manual

10
Zoom out
Zoom in
Previous page
1/72
Next page
English
10
SPECIFICATIONS
POWER TOOL
Model DV14DCL2 DV18DCL2
No-load speed (Low/High) 0 – 400 / 0 – 1500 min
-1
0 – 400 / 0 – 1500 min
-1
No-load impact rate (Low/High) 0 – 5600 / 0 – 21000 min
-1
0 – 5600 / 0 – 21000 min
-1
Capacity
Drilling
Brick
(Depth 30 mm)
13 mm 13 mm
Wood
(Thickness 18 mm)
32 mm 38 mm
Metal
(Thickness 1.6 mm)
13 mm 13 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
Rechargeable battery BCL1415: Li-ion 14.4 V (1.5 Ah
4 cells)
BCL1815: Li-ion 18 V
(1.5 Ah 5 cells)
EBM1830: Li-ion 18 V
(3.0 Ah 10 cells)
Weight 1.5 kg 1.6 kg 1.9 kg
CHARGER
Model UC18YKL
Charging voltage 7.2 – 18 V
Weight 0.4 kg
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
DV14DCL2
DV18DCL2
1 Plus driver bit (No. 2 × 65L) ....................1
2 Charger ..................................................1
3 Plastic case ............................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BCL1415)
(For DV14DCL2)
2. Battery (BCL1815 or EBM1830)
(For DV18DCL2)
Optional accessories are subject to change without notice.
APPLICATIONS
○ Drilling of brick and concrete block, etc.
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various metals.
○ Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch (2 pcs.)
to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the
charger till it contacts
the bottom of the charger and checking the polarities as
shown in Fig. 3.
CAUTION
If the batteries are inserted in the reverse direction, not
only recharging will become impossible, but it may also
cause problems in the charger such as a deformed
recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot lamp will
light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table
1, according to the condition of the charger or the
rechargeable battery.
000Book_DV14DCL2_WE,Tha.indb 10000Book_DV14DCL2_WE,Tha.indb 10 2012/04/06 13:50:272012/04/06 13:50:27
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV14DCL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV14DCL2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info