635267
62
Zoom out
Zoom in
Previous page
1/66
Next page
62
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom Cause Solution
No power. The power cord is disconnected. Plug the power cord into the wall outlet
securely.
No picture. The TV is not set to receive recorder
signal output.
Select the appropriate video input mode
on the TV so the picture from the
recorder appears on the TV screen.
The video cable is not connected
securely.
Connect the video cable securely.
The connected TV power is turned off. Turn on the TV.
No sound. The equipment connected with the
audio cable is not set to receive recorder
signal output.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the recorder.
The audio cables are not connected
securely.
Connect the audio cable securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
The audio connecting cord is damaged. Replace it with new one.
The playback picture is
poor.
The disc is dirty. Clean the disc.
The recorder does not
start playback.
No disc is inserted. Insert a disc. (Check that the disc
indicator in the display window is lit.)
An unplayable disc is inserted. Insert a playable disc. (Check the disc
type, color system, and regional code.)
The disc is placed upside down. Place the disc with the playback side
down.
The disc is not placed within the guide. Place the disc on the disc tray correctly
inside the guide.
The disc is dirty. Clean the disc.
The Rating level is set. Cancel the Rating function or change the
rating level.
The picture from the
external input is distorted
The video signal from the external
component is copy-protected.
You cannot connect via this recorder.
Connect the component directly to your
TV.
Some channels are
skipped over when using
S / T.
Those channels are not stored in the
recorder.
Restore channels. See “Program Edit” on
page 18.
The picture or sound of
broadcasting channel is
weak or missing.
Aerial or cables are loose. Tighten connections or replace cable.
Camcorder image is not
shown.
Camcorder is off. Turn camcorder on and operate
properly.
Camcorder image via
A/V input or DV IN to
recorder is not shown on
TV screen.
The recorder’s source is incorrect. Use EXTERNAL INPUT to select input
channel (AV1, AV2, DV, etc.)
Cannot play a disc
recorded using this
recorder on another
player.
The disc was recorded in Video mode. Finalize the disc. (page 22)
Some players will not play even a
finalized disc recorded in Video mode.
No solution.
The disc was recorded in VR mode. The other player must be RW compatible
in order to play it.
Discs recorded with copy-once material
cannot be played on other players.
No solution.
01EN01DVDS253A(AU).book Page 62 Wednesday, June 7, 2006 3:39 PM
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV-DS163A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV-DS163A in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info