635267
41
Zoom out
Zoom in
Previous page
1/66
Next page
41
Recording
G-CODE System
This system makes programming timer recordings very
simple. Most TV guides publish G-CODE programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding G-
CODE programming number. The
date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it’s a once-only
recording, or a regular recording.
Up to 16 timer programs can be stored in the recorder.
1. Press G-
CODE.
The G-
CODE menu will appear.
Press G-CODE again to exit the menu.
[Number] Enter the G-
CODE programming
number.
[Repeat] Choose a desired repeat (Once, Daily
(Monday - Friday), or Weekly).
2. Use the number buttons then press ENTER to enter
the G-
CODE programming number.
To check the programming, the Timer Record menu
will appear.
W / X (left/right) – move the cursor left/right
If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
3. Use W / X to move the cursor to the Repeat column
then use S / T to select [Repeat] option (Once,
Daily (Monday - Friday), or Weekly).
4. Press ENTER after filling in all the program
information.
The program will be memorized by the recorder.
5. You can change the information as required using
W / X / S / T.
Refer to “Timer Recording” on page 39.
6. Choose a record mode (XP, SP, LP, or EP).
7. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
8. Press RETURN ( ) to exit the Timer Record
menu.
9. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
For HDD recording, also press POWER to set the
recorder to the standby status.
01EN01DVDS253A(AU).book Page 41 Wednesday, June 7, 2006 3:39 PM
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV-DS163A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV-DS163A in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info