635267
22
Zoom out
Zoom in
Previous page
1/66
Next page
22
Auto Chapter
When recording onto a DVD, chapter markers are put
in specified setting. You can change this interval to 5
minutes, 10 minutes or 15 minutes. If you select [None],
switch off automatic chapter marking altogether with
the [None] setting.
Notes:
This interval time is for reference: The actual time will
slightly vary.
When dubbing in [Fast] mode, the auto chapter
feature only works with DVD-RW (Video mode)/
DVD-R/DVD+RW/DVD+RW (DL)/DVD+R discs. It
does not work with DVD-RAM or DVD-RW
(VR mode) discs.
Moreover, the chapter interval time will vary
depending on the recording mode.
Disc Settings
Disc Format
If you load a completely blank disc, the recorder will
initialize the disc.
DVD-R: The recorder initialize the disc to Video
mode. The recording mode will always be Video
mode.
DVD-RAM/DVD-RW/DVD+RW/DVD+R (DL): The
Initialize menu will appearss. Select [OK] then press
ENTER. DVD-RW disc is initialized to VR mode.
Also, you can reformat the DVD-RAM/DVD-RW/
DVD+RW from the Setup menu as below.
1. Select [Disc Format] option then press X.
2. Press ENTER while [Start] is selected.
Format Disc menu appears.
3. Use W / X to select a desired mode (VR Mode or
Video Mode) then press ENTER.
Confirm message will appear.
For DVD-RAMs/DVD+RWs, go to step 4.
4. Use W / X to select [OK] then press ENTER.
It takes a few moments to initialize the disc.
Note:
Even with a DVD-RAM, you must format a brand-new
disc: Follow the instructions on screen.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
MENU/LIST or TITLE MENU.
Caution
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you can record and edit a
DVD-RW disc by choosing [Unfinalize] option.
1. Select [Finalize] option then press X.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
3. Select [OK] then press ENTER.
The recorder starts finalizing the disc.
Notes:
How long finalization takes depends on the type of
disc, how much is recorded on the disc, and the
number of titles on the disc.
DVD+R DL disc can take up to 30 minutes to finalize.
01EN01DVDS253A(AU).book Page 22 Wednesday, June 7, 2006 3:39 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV-DS163A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV-DS163A in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info