Manual Hitachi DV 20 VB2 (page 7 of 44) (German, Dutch, French, Italian, Portuguese, Spanish)

78656

Zoom out

Zoom in

1/44

English

4. Selecting the appropriate drill bit

⅜ When boring concrete or stone

Use the drill bits specified in the Optional Accessories.

⅜ When boring metal or plastic

Use an ordinary metalworking drill bit.

⅜ When boring wood

Use an ordinary woodworking drill bit.

However, when drilling 6.5 mm or smaller holes, use

a metalworking drill bit.

5. Mounting and dismounting of the bit.

For keyed chuck (Fig. 1)

(1) Open the chuck jaws, and insert the bit into the

chuck.

(2) Place the chuck wrench in each of the three holes

in the chuck, and turn it in the clockwise direction

(viewed from the front side). Tighten securely.

(3) To remove the bit, place the chuck wrench into one

of the holes in the chuck and turn it in the

counterclockwise direction.

For keyless chuck

The country of use will determine whether Type A or

Type B keyless chuck is required.

⅜ Type A (Fig. 2)

(1) Mounting the bit

Turn the lock collar in the direction “AUF” and open

the chuck. After inserting the drill bit into the chuck

as far it will go, turn the lock collar in the “ZU”

direction. Grip the ring and close the chuck by turning

the sleeve clockwise as viewed from the front.

(2) Dismounting the bit

Turn the lock collar in the direction “AUF” to release

the chucking force. Grip the ring and open the chuck

by turning the sleeve counterclockwise.

NOTE

When the sleeve does not become loose any further,

fix the side handle to ring, hold side handle firmly,

then turn the sleeve to loosen by hand. (Fig. 4)

Voltage (by areas)* (110V, 220V, 230V, 240V)

Power input 790 W*

Speed change 1 2

No load speed

Forward rotation 0 – 1000 min

-1

0 – 3000 min

-1

Reverse rotation 0 – 600 min

-1

0 – 1800 min

-1

Steel 13 mm 8 mm

Capacity Concrete 20 mm 13 mm

Wood 40 mm 25 mm

Full load impact rate 8000 min

-1

26000 min

-1

Weight (without cord) 2.2 kg

STANDARD ACCESSORIES

(1) Chuck Wrench (Spec. only for keyed chuck) ........... 1

(2) Side Handle ................................................................ 1

(3) Depth Gauge .............................................................. 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

(1) Impact Drill Bit (for concrete)

3.2 mm – 20 mm dia.

Optional accessories are subject to change without notice.

APPLICATIONS

⅜ By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble,

granite, tiles, etc.)

⅜ By ROTATIONAL action:

Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

SPECIFICATIONS

*Be sure to check the nameplate on product as it is subject to change by areas.

IMPACT DRILL SAFETY WARNINGS

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Before drilling into walls, ceilings or floors, ensure

that there are no concealed power cables inside.

4. Always use side handle and hold the tool firmly with

both hands.

5. Always use the impact drill with clockwise rotation,

when using it as an impact drill. (Fig. 11)

01Eng_DV20VB2_WE 12/22/08, 11:216

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV 20 VB2 in the language / languages: German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi DV 20 VB2

Hitachi DV 20 VB2 User Manual - English, Danish, Swedish, Norwegian, Finnish - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DV 20 VB2 Manual

Product: