386270
27
Zoom out
Zoom in
Previous page
1/34
Next page
26
English
11. Do not insert foreign object into the air ventilation
slots of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
12. Wear ear protections
Exposure to noise can cause hearing loss.
13. When mounting a bit into the keyless chuck, tighten
the sleeve securely. If the sleeve is not tight, the
bit may slip or come off, causing injury.
CHARGER
Model UC12SD
Charging time Approx. 1 hour (at 20°C)
Charging voltage 12 V
Weight 1.4 kg
SPECIFICATIONS
POWER TOOL
STANDARD ACCESSORIES
Capacity
Model DV12DV
No-load speed (Low/High) 0 350/0 1250 min
–1
No-load impact rate (Low/High) 0 5250/0 18750 min
–1
Brick 10 mm
Drilling Wood 18 mm
Metal Steel: 10 mm, Aluminum: 10 mm
Driving
Machine screw 6 mm
Wood screw 5.1 mm (diameter) × 32 mm (length) (Requires a pilot hole)
Rechargeable battery (FEB12S) Ni-Cd battery, 12 V
Weight 1.9 kg
OPTIONAL ACCESSORIES ......(sold separately)
1. Battery (FEB12S)
2. Drill bit for brick
Diameter, 6.5 mm, 8 mm, 9.5 mm, 10 mm
Optional accessories are subject to change without
notice.
1 Plus driver bit (No. 2 × 55L) .........1
DV12DV
2 Charger (UC12SD) ............................. 1
3 Plastic case ..........................................1
4 Hook .....................................................1
Standard accessories are subject to change without
notice.
APPLICATIONS
Drilling of brick and concrete block, etc.
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals.
Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch
to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the impact drill, charge the battery as
follows.
1. Insert the battery in the charger.
Position the battery so that the nameplate faces
toward the nameplate of the charger and press in
the battery until it comes into contact with the
bottom surface. (See Figs. 1 and 3.)
2. Connect the charger power cord to the receptacle.
Connecting the power cord will turn on the charger
(the pilot lamp lights up).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi dv 12dv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi dv 12dv in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi dv 12dv

Hitachi dv 12dv User Manual - German, Dutch, French, Italian, Spanish - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info