566541
6
Zoom out
Zoom in
Previous page
1/45
Next page
English
5
12. When mounting a bit into the keyless chuck, tighten
the sleeve adequately. If the sleeve is not tight, the
bit may slip or come off, causing injury.
SPECIFICATIONS
POWER TOOL
Model DS7DF
No-load speed 0 600 min
1
Wood
(Thickness 18mm)
15 mm
Drilling
Metal Steel: 10 mm,
Capacity (Thickness 1.6mm) Aluminum: 10 mm
Machine screw 6 mm
Driving
Wood screw
5.1 mm (diameter) × 32 mm (length)
(Requires a pilot hole)
Rechargeable battery
FEB7S: Ni-Cd 7.2 V EB712S: Ni-Cd 7.2 V
(1.4 Ah, 6 cells) (1.2 Ah, 6 cells)
Weight 1.3 kg 1.2 kg
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (FEB7S, EB712S)
Optional accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals.
Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery. (See Figs. 1 and 2)
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its direction. (See
Fig. 2)
CHARGING
Before using the driver drill, charge the battery as follows.
1. Insert the battery into the charger.
Position the battery so that the nameplate faces
toward the nameplate of the charger and press in the
battery until it comes into contact with the bottom
surface. (See Figs. 1 and 3)
2. Connect the charger power cord to the receptacle.
Connecting the power cord will turn on the charger
(the pilot lamp lights up).
CAUTION
If the pilot lamp does not light up, pull out the
power cord from the receptacle and check the
battery mounting condition.
(1) Regarding recharging time
Depending on the combination of the charger and
batteries, the charging time will become as shown in
Table 1.
STANDARD ACCESSORIES
CHARGER
Model UC7SB UC7SD
Charging voltage 7.2 V
Weight 1.0 kg 1.1 kg
1 Plus driver bit (No. 2ן55L) ........ 1
DS7DF 2 Charger (UC7SB or UC7SD) ........... 1
3 Plastic case....................................... 1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DS7DF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS7DF in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info