566530

Hitachi DS18DL2 Manual

11
Zoom out
Zoom in
Previous page
1/92
Next page
English
10
STANDARD ACCESSORIES
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
⅜ Battery
Optional accessories are subject to change without notice.
APPLICATIONS
<DS14DL2 / DS18DL2>
⅜ Driving and removing of machine screws, wood
screws, tapping screws, etc.
⅜ Drilling of various metals
⅜ Drilling of various woods
<DV14DL2 / DV18DL2>
⅜ Drilling of brick and concrete block, etc.
⅜ Driving and removing of machine screws, wood
screws, tapping screws, etc.
⅜ Drilling of various metals
⅜ Drilling of various woods
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect to the power source
When charging the battery from an AC power source
⅜ Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At 1-
second intervals).
CAUTION:
Do not use the electrical cord if damaged. Have it
repaired immediately.
When charging the battery from a DC 12V in-car power
source (UC18YMRL)
⅜ Secure the battery charger in place in the car.
Use the strap supplied with the battery charger to
fasten the battery charger in place and prevent it
from moving inadvertently. (See Fig. 25)
CAUTION:
Do not place the battery charger or battery under
the driver’s seat. Secure the battery charger in
place to prevent it from moving inadvertently as
this may lead to an accident.
⅜ Insert the cigarette lighter connecting plug into the
cigarette lighter socket.
If the plug is loose and falls out of the cigarette
lighter socket, repair the socket. As the socket may
be faulty, you are recommended to contact your
local car dealer. Continued use of the socket may
result in an accident due to overheating. (Fig. 3)
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 3.
CAUTION:
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
(BCL1430)
(BCL1440)
(EBM1830)
(BCL1840)
Fig. 25
1 Plus driver bit (No.2) .................... 1
2
Charger (UC18YMRL or UC18YRL) ...
1
DS14DL2 3 Battery ...............................1 or 2 or 3
4 Plastic case ....................................... 1
5 Side handle ....................................... 1
1 Plus driver bit (No.2) .................... 1
2
Charger (UC18YMRL or UC18YRL) ...
1
DS18DL2 3 Battery ...............................1 or 2 or 3
4 Plastic case ....................................... 1
5 Side handle ....................................... 1
1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YRL) ......................... 1
DV14DL2 3 Battery ...............................1 or 2 or 3
4 Plastic case ....................................... 1
5 Side handle ....................................... 1
1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YRL) ......................... 1
DV18DL2 3 Battery ...............................1 or 2 or 3
4 Plastic case ....................................... 1
5 Side handle ....................................... 1
Without charger, battery, and plastic
case.
DS14DL2 (NN)
DS18DL2 (NN)
DV14DL2 (NN)
DV18DL2 (NN)
01Eng_DS14DL2_WE.p65 2/3/12, 4:49 PM10
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DS18DL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS18DL2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info