566526

Hitachi DS18DCL Manual

9
Zoom out
Zoom in
Previous page
1/68
Next page
English
9
SPECIFICATIONS
POWER TOOL
Model DS14DCL DS18DCL
No-load speed (Low/High) 0 – 450 / 0 – 1250 min
-1
0 – 450 / 0 – 1250 min
-1
Capacity
Drilling
Wood
(Thickness 18 mm)
30 mm 38 mm
Metal
(Thickness 1.6 mm)
Steel: 12 mm Steel: 13 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
6.2 mm (diameter) × 63 mm (length)
(Requires a pilot hole)
6.8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
Rechargeable battery
BCL1415: Li-ion
14.4 V (1.5 Ah 4 cells)
BCL1430: Li-ion
14.4 V (3.0 Ah 8 cells)
BCL1815: Li-ion 18 V (1.5 Ah 5 cells)
Weight
1.4 kg 1.8 kg 1.6 kg
CHARGER
Model UC18YKL
Charging voltage 7.2 – 18 V
Weight 0.4 kg
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
DS14DCL
DS18DCL
1 Plus driver bit (No. 2 × 65L) .................... 1
2 Charger ..................................................1
3 Plastic case ............................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BCL1415 or BCL1430)
(For DS14DCL)
2. Battery (BCL1815)
(For DS18DCL)
Optional accessories are subject to change without notice.
APPLICATIONS
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various metals.
○ Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities as
shown in Fig. 3.
CAUTION
If the batteries are inserted in the reverse direction, not
only recharging will become impossible, but it may also
cause problems in the charger such as a deformed
recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
01Eng_DS14DCL_WETh.indd 901Eng_DS14DCL_WETh.indd 9 2013/05/17 8:15:172013/05/17 8:15:17
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DS18DCL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS18DCL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info