Manual Hitachi DS14DSFL (page 9 of 64) (English, German, Dutch, French, Italian, Portuguese, Spanish)

566539

Zoom out

Zoom in

1/64

English

WARNING

If a conductive foreign matter enters in the terminal of

lithium ion battery, the battery may be shorted, causing ﬁ re.

When storing the lithium ion battery, obey surely the rules of

following contents.

○ Do not place conductive debris, nail and wires

such as iron wire and copper wire in the

storage

case.

○ To prevent shorting from occurring, load the

battery in the tool or insert securely the battery

cover for storing until the ventilator is not seen

(See Fig. 1).

SPECIFICATIONS

POWER TOOL

Model DS14DSFL DS18DSFL

No-load speed (Low/High) 0 – 450 / 0 – 1250 min

-1

0 – 450 / 0 – 1250 min

-1

Capacity

Drilling

Wood

(Thickness 18 mm)

30 mm 38 mm

Metal

(Thickness 1.6 mm)

Steel: 12 mm Steel: 13 mm

Driving

Machine screw

6 mm 6 mm

Wood screw

6.0 mm (diameter) × 75 mm (length)

(Requires a pilot hole)

6.8 mm (diameter) × 50 mm (length)

(Requires a pilot hole)

Rechargeable battery

BSL1415: Li-ion 14.4 V (1.5 Ah 4 cells)

BSL1815: Li-ion 18 V

(1.5 Ah 5 cells)

BSL1830: Li-ion 18 V

(3.0 Ah 10 cells)

Weight

1.5 kg 1.7 kg 2.0 kg

CHARGER

Model UC18YGSL

Charging voltage 14.4 – 18 V

Weight 0.4 kg

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the

accessories listed in the table below.

DS14DSFL

DS18DSFL

1 Plus driver bit (No. 2 × 65L) .................... 1

2 Charger ..................................................1

3 Plastic case ............................................1

4 Battery ....................................................2

(DS14DSFL: BSL1415)

(DS18DSFL: BSL1815 or BSL1830)

5 Battery cover ..........................................1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. Battery (BSL1415)

(For DS14DSFL)

2. Battery (BSL1815 or BSL1830)

(For DS18DSFL)

Optional accessories are subject to change without notice.

APPLICATIONS

○ Driving and removing of machine screws, wood screws,

tapping screws, etc.

○ Drilling of various metals.

○ Drilling of various woods.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the handle tightly and push the battery latch to

remove the battery (see Figs. 1 and 2).

CAUTION

Never short-circuit the battery.

2. Battery installation

Insert the battery while observing its polarities (see

Fig. 2).

CHARGING

Before using the driver drill, charge the battery as follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to

a receptacle, the pilot lamp will blink in red

(At 1-second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the

charger till it contacts

the bottom of the charger and checking the polarities as

shown in Fig. 3, 4.

CAUTION

If the batteries are inserted in the reverse direction, not

only recharging will become impossible, but it may also

cause problems in the charger such as a deformed

recharging terminal.

Charging

When inserting a battery in the charger, the pilot lamp

will light up continuously in red.

When the battery becomes fully recharged, the

pilot lamp will blink in red (At 1-second intervals).

(See Table 1)

(1) Pilot lamp indication

The indications of the pilot lamp will be as shown in

Table 1, according to the condition of the charger or the

rechargeable battery.

000Book_DS14DSFL_WE.indb 9000Book_DS14DSFL_WE.indb 9 2011/08/19 14:47:452011/08/19 14:47:45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS14DSFL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DS14DSFL Manual

Product: