78454
10
Zoom out
Zoom in
Previous page
1/108
Next page
English
10
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid
contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a quali ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in rm persons away.
When not in use, tools should be
stored out of reach of
children and in rm persons.
PRECAUTIONS FOR CORDLESS DRIVER DRILL
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool
"live" and could give the
operator an electric shock.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
4.
Always charge the battery at a temperature of 10°C
40°C. A temperature of less than 10°C will result in over
charging which is dangerous. The battery cannot be
charged at a temperature higher than 40°C.
The most suitable temperature for charging is that of
20°C 25°C.
5. When one
charging is completed, leave the charger for
about 15 minutes before the next charging of battery.
Do not charge more than two batteries consecutively.
6. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
7. Never disassemble the rechargeable battery and
charger.
8. Never short-circuit the rechargeable
battery. Short-
circuiting the battery will cause a great electric current
and overheat. It results in burn or damage to the battery.
9. Do not dispose of the battery inre.
If the battery is burnt, it may explode.
10. Bring the battery to the shop from which it was purchased
as
soon as the post-charging battery life becomes too
short for practical use. Do not dispose of the exhausted
battery.
11. Using an exhausted battery will damage the charger.
12. Do not insert object into the air ventilation slots of the
charger.
Inserting metal objects or in ammables into the charger
air
ventilation slots will result in electrical shock hazard or
damaged charger.
13. When mounting a bit into the keyless chuck, tighten the
sleeve adequately. If the sleeve is not tight, the bit may
slip or fall out, causing injury.
SPECIFICATIONS
POWER TOOL
Model DS9DVF3 DS12DVF3
No-load speed (Low/High) 0 280 / 0 840 min
-1
0 350 / 0 1050 min
-1
Capacity
Drilling
Wood
(Thickness 18 mm)
21 mm 25 mm
Metal
(Thickness 1.6 mm)
Steel: 10 mm Steel: 12 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
5.8 mm (diameter) × 45 mm (length)
(Requires a pilot hole)
5.8 mm (diameter) × 63 mm (length)
(Requires a pilot hole)
Rechargeable battery
EB912S: Ni-Cd 9.6 V (1.2 Ah 8 cells)
EB914S: Ni-Cd 9.6 V (1.4 Ah 8 cells)
BCC915: Ni-Cd 9.6 V (1.5 Ah 8 cells)
EB9B: Ni-Cd 9.6 V (2.0 Ah 8 cells)
EB1212S: Ni-Cd 12 V (1.2 Ah 10 cells)
EB1214S: Ni-Cd 12 V (1.4 Ah 10 cells)
BCC1215: Ni-Cd 12 V (1.5 Ah 10 cells)
EB1220BL: Ni-Cd 12 V (2.0 Ah 10 cells)
BCH1220: Ni-MH 12 V (2.0 Ah 10 cells)
Weight
1.4 kg 1.5 kg
000Book_DS9DVF3_WETha.indb 10000Book_DS9DVF3_WETha.indb 10 2012/06/06 8:46:132012/06/06 8:46:13
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DS 18 DVF3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS 18 DVF3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi DS 18 DVF3

Hitachi DS 18 DVF3 User Manual - English, Danish, Swedish, Norwegian, Finnish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info