566518

Hitachi DH50SA1 Manual

7
Zoom out
Zoom in
Previous page
1/50
Next page
6
English
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Input* 1140W
Capacity Drill bit: 50 mm
Core bit: 125 mm
No load speed 300 min
-1
Full-load impact rate 2450 min
-1
Weight (without cord, side handle) 9.8 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
⅜ Large-dia. hole boring (Rotation + Striking):
(1) Center Pin (Guide (2) Core (3) Core bit
plate) bit shank
(1) Center pin
Applied to core bits from 50 mm to 125 mm.
(2) Core bit
External dia.: 50, 65, 80, 90, 100, 125 mm
(3) Core bit shank
⅜ Crushing:
(1) Cold chisel
Total length: 300, 380, 450 mm
⅜ Groove digging and edging:
(1) Cold chisel
Total length: 300, 380, 450 mm
⅜ Asphalt cutting:
(1) Cutter
Width: 50, 75 mm
Total length: 400 mm
SPECIFICATIONS
STANDARD ACCESSORIES
(1) Case ........................................................................... 1
I type: Side handle ...................... 1
(2) Side handle II type: Bar type handle ............... 1
D type handle .................. 1
Either type I or type II Side handle is attached.
(3) Stopper (I type Side handle only) ....................... 1
(4) Dust cover ................................................................. 1
(5) Hammer grease A ................................................... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
⅜ Through-hole drilling:
(1) Drill bit (hexagon shank)
Total length: 420, 570 mm
External dia.: 16, 18, 20, 22, 25, 28, 30, 32, 35, 38,
40, 44, 50 mm
⅜ Anchor hole drilling (Rotation + Striking):
(3) Cotter
(1) K-Taper shank adapter (2) A-Taper
sleeve
PRECAUTIONS ON USING ROTARY HAMMER
1. Wear ear protections
Exposure to noise can cause hearing loss.
2. Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
3. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
4. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
5. Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
6. Wear a dust mask
Do not inhale the harmful dusts generated in
drilling or chiseling operation. The dust can
endanger the health of yourself and bystanders.
01Eng_DH50SA1_WE 4/17/07, 20:176
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DH50SA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH50SA1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info