Manual Hitachi DH50MRY (page 9 of 64) (English, German, Dutch, French, Italian, Portuguese, Spanish)

566516

Zoom out

Zoom in

1/64

English

(1) Center pin

ⅷ Applied to core bits from 38 mm to 150 mm

ⅷ Applied to core bits 32 mm and 35 mm

NOTE:

Do not use core bits 25 mm or 29 mm.

(2) Core bit

ⅷ External dia. 25, 29, 32, 35, 38, 45, 54, 64, 79, 94,

105, 120, 150 mm

(with guide plate, not applicable to cores 25 mm

or 29 mm)

(3) Core bit shank

ⅷ Applied to core bits above 38 mm

ⅷ Applied to core bits below 35 mm

4. Drilling holes .... For drilling metal and wooden

materials

5. Bolt placing operation with Chemical Anchor

(Rotation + Hammering)

6. Crushing (Hammering)

7. Groove digging and edging (Hammering)

8. Asphalt cutting (Hammering)

9. Scooping Work (Hammering)

10. Surface Roughing (Hammering)

11. Tamping (Hammering)

12. Syringe (for chip removal)

⅜ Hammer grease A

500 g (in a can)

70 g (in a green tube)

30 g (in a green tube)

Optional accessories are subject to change without

notice.

APPLICATIONS

⅜ Drilling holes in concrete

⅜ Drilling anchor holes

⅜ Crushing concrete, chipping, digging, and squaring

(by applying optional accessories)

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a power receptacle while

the power switch is in the ON position, the power

tool will start operating immediately, which could

cause a serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. How to install tool

NOTE:

For tools such as a bull point and a cold chisel,

use only Hitachi genuine parts.

(1) Clean, then smear the tool shank with the grease

provided in the green tube (Fig. 1).

(2) To attach the tool (SDS max shank), insert it into

the hole until it contacts the innermost end of the

hole as illustrated in Fig. 2.

If you continue to turn the tool with slight pressure,

you can feel a spot where there is a hitch. At that

spot, pull the grip to the direction of an arrow mark

and insert the tool all the way until it hits the

innermost end.

(Standard socket

on the market)

(SDS max shank)

12.7 mm Chemical

Anchor Adaptor

19 mm Chemical

Anchor Adaptor

(1) Bull point

Overall length: 280, 400 mm

(1) Cold chisel

Overall length: 280, 400 mm

(1) Cutter

(1) Scoop

(2) Shank

(1) Bushing Tool

(2) Shank

(1) Rammer

150 × 150 mm

13 mm drill chuck

(13VLA)

Chuck adapter

(SDS max shank)

Chuck wrench

01Eng_DH50MRY_WE 08/4/23, 11:348

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH50MRY in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DH50MRY Manual

Product: