566514
35
Zoom out
Zoom in
Previous page
1/38
Next page
Español
34
1 C-Type Spring
2 Steel Ball D7.0
3 Front Cap
4 Retaining Ring D32
5 Front Washer (A)
6 Damper Ring
7 Front Washer (B)
8 Grip
9 Saddle Key
10 Saddle Key Holder
11 Retaining Ring For D38 Shaft
12 Rubber Ring
13 Nylock High Tension Bolt M7×25
14 Front Sleev
15 Front Cover
16 O-Ring (1AS-60)
17 O-Ring (C)
18 Second Hammer
19 Damper Washer
20 Damper
21 Washer
23 Feather Key 3×3×8
24 Oil Seal (A)
25 Ball Bearing (6002DDUCMPS2S)
26 Washer
27A Washer (A)
28 Gear Holder
29 Spring (C)
30 Needle Pin D6×6
31 Second Gear
32 Spacer
33 Ball Bearing (629VVMC2EPS2L)
35 Nylock Bolt (W/Flange) M5×16
36 Distance Piece (B)
37 Crank Case Cover Assy
38 Rubber Seal
39 Crank Case
40 Retaining Ring For D12 Shaft
41 Crank Shaft
42 Feather Key 3×3×10
43 Ball Bearing (6204VVCMPS2S)
44 Oil Seal (B)
45 Bearing Cover
46 Nylock Hex. Socket Hd. Bolt M5×16
47 Needle Bearing (M661)
48 First Gear
49 Seal Packing
50A Gear Cover Assy
51 Feather Key 3×3×20
52 Cylinder
53 Clutch Spring
54 Valve Band
55 Striker
56 O-Ring
57 Clutch
58 Piston
59 Piston Pin
60 Connecting Rod Assy
61 Needle Bearing (NSK AJ501203)
62 Nylock Bolt (W/Flange) M6×25
63 Cylinder Case
64 O-Ring (1AS-60)
65 Needle Bearing (B)
67 Side Handle
68 Handle Holder
69 Handle Bolt
70 Stopper Rod
71 O-Ring (P-16)
72 Lever Shaft
73 Under Cover
74 Shaft Cover
75 Nylock Hex. Socket Hd. Bolt M4×12
76 Steel Ball D3.97
77 Spring (B)
78 Lever
79 Ball Bearing (6202VVCMPS2S)
80 Dust Washer (B)
81 O-Ring
82 Hex. Hd. Tapping Screw D5×55
83 Dust Washer (A)
84 Ball Bearing (629VVMC2EPS2L)
85 Housing
86 HITACHI Label
87 Brush Cap
88A Carbon Brush
89 Brush Holder
90 Hylock Bolt (W/Flange) M5×25
91 Hex. Socket Set Screw M5×8
92 Bearing Holder
93 Tail Cover
94 Tapping Screw (W/Flange) D5×20
95 Fan
96 Armature Assy
97 Stator Assy
98 Brush Terminal
99 Handle
100 Switch (C)
101 Handle Cover
102 Tapping Screw (W/Frange) D4×20
103 Terminal
104 Cord Clip
105 Tapping Screw (W/Flange) D4×16
106 Cord
107 Tapping Screw (W/Flange) D5×25
108 Name Plate
109 Cord Armor
110 Plug (A)
111 Plug (B)
112 Connector
113 Pillar Terminal
114 Bearing Washer (C)
115 Bevel Gear Pinion Set
116 Bevel Gear Clutch Assy
501 Case
502 Grease (A) For Hammer. Hammer Drill
503 Hex. Bar Wrench 4MM
504 Hex. Bar Wrench 5MM
507 Dust Cup
Parts are subject to possible modification without notice
due to improvements.
Item
No.
Part Name
Item
No.
Part Name
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DH40YB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH40YB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info