566514
16
Zoom out
Zoom in
Previous page
1/38
Next page
Français
15
Avant de briser, découper ou percer un mur, le
plancher ou le plafond, sassurer quaucun câble
électrique ou conduit ny soit noyé.
(2) Mandrin
(1) Point de broyage
Longueur totale: 280 450 mm
(1) Ciseau à froid
Longueur totale: 280 450 mm
Maintenir toujours fermenent la poignée principale
et la poignée latérale de la machine. Dans le cas
contraire, la force de recul peut amoindrir la précision
de travail et présenter aussi quelque danger.
CARACTERISTIQUES
Tension (par zone)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Entrée 950 W*
Capacité Mèche: 40 mm
Couronne: 105 mm
Vitesse sans charge 360/min.
Vitesse de percussion pleine charge 2800/min.
Poids (sans cordon ni poignée latérale) 6,6 kg
Assurez-vous de vérifier la plaque signalétique sur le produit, car elle peut changer suivant les zones.
Perçage de trous à large diamètre (rotation + frappe)
(1) Goujon central
Appliqué à couronnes 38 mm ~ 105 mm
Appliqué à couronnes 32 mm et 35 mm
REMARQUE
Ne pas utiliser de couronnes 25 mm et 29 mm
(2) Couronne
Dia. ext.
25 29 32 35 38 45 54 64 79 94 105 mm
(avec plaque de guidage pas applicable à couronne
25 mm et 29 mm)
(3) Queue de couronne
Appliquè à couronnes de plus de 38 mm
Appliqué à couronnes de moins de 35 mm
Groupe dancrage (pour ancres auto-perceuses)
(1) Raccord dancre (pour rotation + frappe)
Dimension dancre:
W1/4, W5/16, W3/8, W1/2, W5/8
(No. 20) (No. 25) (No. 30) (No. 40) (No. 50)
Broyage (frappe)
Creusage de rainures et cassure des angles (frappe)
ACCESSOIRES STANDARD
(1) Boîtier (Plastique) ..................................................... 1
(2) Poignée latérale ........................................................ 1
(3) Quenouille .................................................................. 1
(4) Clef à barre hexagonale (pour vis de 6 mm) ... 1
(5) Clef à barre hexagonale (pour vis de 5 mm) ... 1
(6) Graisse A pour marteau ......................................... 1
(7) Godet à poussière ................................................... 1
Les accessoires à option sont sujets à changement sans
préavis.
ACCESSOIRES EN OPTION
(vendus séparément)
Perçage de trous de passage (rotation + frappe)
(1) Mèche (queue hexgonale)
Longueur totale: 280 400 505 mm
Dia. ext.: 16 19 22 25 28 32 38 mm
Perçage de trous dancrage (rotation + frappe)
(2) Raccord de queue
conique
(1) Mèche
(queue conique)
dia. ext.: 11 12
14,3 14,5 17,5
21,5 mm
(3) Clavette
Raccord de
queue conique
Mèche Morse
(No. 1)
Mèche Morse
(No. 2)
Cône-A
Cône-B
Mèche applicable
Mèche (queue conique)
11 12 14,3 14,5 17,5 mm
Mèche (queue conique)
21,5 mm
La raccord de queue conique en
forme cône-A ou cône-B est fourni
en tant quaccessoire sur option,
mais la mèche correspondante
nest par fournie.
(plaque de guidage)
(1) Goujon
central
(2) Couronne
(3) Queue de
cournne
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DH40YB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH40YB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info