566510
7
Zoom out
Zoom in
Previous page
1/34
Next page
6
English
(3) Cotter
3. Large dia. hole boring (Rotation + Hammering)
STANDARD ACCESSORIES
(1) Case (Molded plastic) ............................................... 1
(2) Side Handle ................................................................ 1
(3) Stopper ........................................................................ 1
(4) Hexagon Bar Wrench (for 6 mm screw) .............1
(5) Hexagon Bar Wrench (for 5 mm screw) .............1
(6) Hammer Grease A .................................................... 1
(7) Dust Cover..................................................................1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Through-hole drilling (Rotation + Hammering)
(1) Drill bit (spline shank)
Overall length: 400 mm
External dia.: 12.7, 25.4, 38.1 mm
2. Anchor hole drilling (Rotation + Hammering)
(1) Center pin
Applied to core bits from 38 mm to 105 mm
(2) Core bit
External dia. 50, 105 mm (with guide plate)
(3) Core bit shank
Applied to core bits above 38 mm
4. Crushing (Hammering)
5. Groove digging and edging (Hammering)
6. Asphalt cutting (Hammering)
7. Syringe (for chip removal)
8. Hammer grease A
500 g (in a can)
70 g (in a green tube)
30 g (in a green tube)
Optional accessories are subject to change without
notice.
APPLICATIONS
Drilling holes in concrete
Drilling anchor holes
Crushing concrete, chipping, digging, and squaring
(by applying optional accessories)
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
(1) Bull point
Overall length: 300 mm
(2) Taper shank
adapter
(Spline shank)
(1) Drill bit (taper shank)
(2) Core
bit
(3) Core bit
shank
(Spline shank)
(1) Center
pin
(Guide
plate)
(1) Cold chisel
Overall length: 300, 460 mm
(1) Cutter
SPECIFICATIONS
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power input 950 W*
Capacity Drill bit: 40 mm
Core bit: 105 mm
No load speed 360/min.
Full-load blow 2800/min.
Weight (without cord, side handle) 6.7 kg
*Be sure to check the nameplate on product as it is subject to change by areas.
Taper shank
adapter
A-taper
B-taper
Application drill bit
Taper shank adapter formed A-
taper or B-taper is provided as
optional accessory, but drill bit
for it is not provided.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DH40FA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH40FA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info