78778
11
Zoom out
Zoom in
Previous page
1/86
Next page
10
English
Cutter (SDS-plus shank) (Model DH25DAL and
DH36DAL only)
7. Grooving (Hammering only)
Grooving chisel (SDS-plus shank) (Model DH25DAL
and DH36DAL only)
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G) and chuck wrench
9. Drilling holes (rotation only)
13 mm drill chuck ass’y (include chuck wrench
ass’y) and chuck (for drilling in steel or wood).
10. Driving Screws (rotation only)
11. Dust cup, Dust collector (B)
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
Drilling anchor holes
Drilling holes in concrete
Drilling holes in tile
Taper mode Applicable drill bit
Morse taper Drill bit
11.0 – 17.5 mm
(No. 1) (taper shank)
Morse taper Drill bit
21.5 mm
(No. 2) (taper shank)
A-taper
B-taper
Taper shank adapter formed A-taper
or B-taper is provided as an optional
accessory, but drill bit for it is not
provided.
Taper shank adapter
13 mm Hammer
Drill Chuck
(SDS plus shank)
Impact Drill Application
Straight Shank Bit
()
13 mm Hammer Drill chuck and Chuck wrench
Chuck wrench
Anchor size
W1/4"
W5/16"
W3/8"
3. Anchor setting (rotation + hammering)
Anchor setting adapter (for rotary hammer)
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
Anchor setting adapter (for manual hammer)
4. Bolt placing operation with Chemical Anchor.
(rotation + hammering)
5. Demolishing operation (Hammering only)
(Model DH25DAL and DH36DAL only)
Bull point (Round type) (SDS-plus shank)
Bull point (Square type) (SDS-plus shank)
6. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank) (Model DH25DAL and
DH36DAL only)
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
Anchor setting adapter
(for manual hammer)
(SDS-plus shank)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Standard socket
on the market
( )
Special
screw
Drill chuck (13VLR) Chuck adapter (G)
(SDS plus shank)
Chuck wrench
Drill chuck (13VLA) Chuck adapter (D)
(SDS plus shank)
Chuck wrench
Dust cup
Dust collector (B)
Bit
No.
Chuck adapter (D)
(SDS plus shank)
Bit No. Screw Size Length
No. 2 3–5 mm 25 mm
No. 3 5–8 mm 25 mm
01Eng_DH25DL_WE 08/4/30, 09:3310
11


Need help? Post your question in this forum.

Forumrules
1

Forum

hitachi-dh-36-dl

Reset search

  • Hi I’ve got a hitachi dh 36 dl when drilling on hammer it drills quite easy then after a depth of about 75mm it stops rotating and drill bit gets stuck. Any help Submitted on 16-6-2022 at 16:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DH 36 DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DH 36 DL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info