616683
8
Zoom out
Zoom in
Previous page
1/244
Next page
8
English
18. Do not switch the unit on while the chain case is
attached.
Injury may occur.
19. Ensure there are no nails and other foreign objects in
the material.
If the saw chain impact on the nail etc., injury may
occur.
20. To avoid the guide bar becoming entangled with the
material when chopping on a verge or when subject to
the weight of material while cutting, install a supporting
platform close to the cutting position.
If the guide bar becomes entangled, injury may occur.
21. If the unit is to be transported or stored after use, either
remove the saw chain, or attach the chain cover.
If the saw chain comes into contact with your body,
injury may occur.
22. Adequately care for the unit.
To ensure work can be performed safely and e ciently,
care for the saw chain to ensure it provides optimal
cutting performance.
When replacing the saw chain or guide bar, maintaining
the body, lling oil etc., follow the instruction manual.
23. Ask the shop to repair the unit.
Do not modify this product, since it already complies
with the applicable safety standards.
Always refer to your Hitachi Authorized Service Center
for all repairs.
Attempting to repair the unit yourself may result in an
accident or injury.
24. When not using the unit, ensure it is properly stored.
Drain o the chain oil, and keep in a dry place out of
reach of children or a locked location.
25. If the warning label is no longer visible, peels o or is
otherwise unclear, apply a new warning label.
For the warning label, refer to your Hitachi Authorized
Service Center.
26. When working, if local rules or regulations apply,
comply with the same.
27. Recommendation for the use of a residual current
device with a tripping current of 30 mA or less
28. Statement to position the cord of so that it will not be
caught on branches and the like, during cutting
29. Recommendation that the rst-time user should, as
a minimum practice, cutting logs on a saw-horse or
cradle
DESCRIPTION OF NUMBERED ITEMS (Fig. 2 - Fig. 38)
1
Kickback zone
@
Blade direction
e
Oil sight glass
f
1/5 of diameter of le
2
Chain brake
#
Chain tensioner hole
r
Oil pump adjuster
g
Depth gage jointer
3
Free
$
Chain tensioner boss
t
Lock-o button
h
Flat le
4
Lock
%
Increase the tension
y
Switch
j
Protruding depth gage
head
5
Knob
^
Decrease the tension
u
Plug clip
k
Round o
6
Tension dial
&
Drive link
i
Plug
l
Brake band chamber
7
Side cover
*
Fasten
o
Extension cord
;
Chain oil spout
8
Guide bar
(
Pull
p
Spiked bumper
z
Groove
9
Saw chain
)
Actuation
a
Front handle
x
Oil hole
0
Guide bar tip
q
Release
s
Rear handle
c
Chain catcher
!
Sprocket
w
Chain oil
d
Round le
SPECIFICATIONS
Model CS30SB CS35SB CS40SB
Guide bar length (Max. cutting length) 300 mm 350 mm 400 mm
Guide bar Type P012-50CR P014-50CR P016-50CR
Voltage (by areas)*
1
(220 V, 230 V, 240 V)
Power Input*
1
1900 W
No-load chain speed 14.5 m/s
Type of chain 91PX-45 (Oregon) 91PX-52 (Oregon) 91PX-57 (Oregon)
Chain pitch / Gauge 9.53 mm (3/8") / 1.27 mm (0.05")
Sprocket Number of teeth: 6
Oil pump Automatic
Chain oil tank capacity 200 ml
Overload protection Electrical
Chain brake Manually actuated
Weight*
2
4.7 kg 4.8 kg 4.9 kg
*1 Be sure to check the nameplate on product as it is subject to change by areas.
*2 Weight: According to EPTA-Procedure 01/2003
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CS40SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CS40SB in the language / languages: All languages as an attachment in your email.

The manual is 16,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info