Manual Hitachi CR10DL-01 (page 15 of 72) (English, German, Dutch, French, Italian, Portuguese, Spanish)

565948

Zoom out

Zoom in

1/72

English

NOTE

No. 2 – No. 96 HCS blades are sold separately as

optional accessories.

2. Selection of BI-METAL blades

The BI-METAL blade numbers in Table 3 are

described on the packages of special accessories.

Select appropriate blades by referring to Table 3

and 4 below.

Table 3: Bl-METAL blades

NOTE

Nos. 101 – No. 109 Bl-METAL blades are sold

separately as optional accessories.

3. Selection of blades for other materials

Table 4

MAINTENANCE AND INSPECTION

CAUTION

Be sure to turned off the switch and remove the

battery before maintenance and inspection.

1. Inspecting the blade

Continued use of a dull or damaged blade will

result in reduced cutting efficiency and may cause

overloading of the motor. Replace the blade with

a new one as soon as excessive abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the

power tool. Exercise due care to ensure the winding

does not become damaged and/or wet with oil or

water.

4. Cleaning of the outside

When the Cordless Reciprocating Saw is stained,

wipe with a soft dry cloth or a cloth moistened with

soapy water. Do not use chloric solvents, gasoline

or paint thinner, as they melt plastics.

5. Storage

Store the Cordless Reciprocating Saw in a place in

which the temperature is less than 40°C, and out

of reach of children.

6. Service parts list

A : Item No.

B : Code No.

C : No. Used

D : Remarks

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed in

each country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country specific regulation. This guarantee

does not cover defects or damage due to misuse, abuse,

or normal wear and tear. In case of complaint, please

send the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a Hitachi Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

Blade Thickness

No.

Uses

(mm)

No. 101

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

No. 103

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

No. 107

For cutting steel and stainless pipes

less than 60 mm in outer diameter

Below 3.5

No. 109

For cutting steel and stainless pipes

less than 60 mm in outer diameter

2.5 – 6

Material Material Thickness

Blade No.

to be cut quality (mm)

Iron plate Mild steel 2.5 – 10 No. 2, 101,

plate 103, 109

Below 3.5 No. 3, 107

Nonferrous Aluminium, 5 – 20 No. 2, 101,

metal Copper and 103, 109

Brass

Below 5 No. 3, 107

Systhetic Phenol resin, 10 – 50 No. 2, 4,

resin Melamine 101, 103

resin, etc.

5 – 30 No. 3, 5, 8,

107, 109

Vinyl chloride,

10 – 60 No. 2, 4,

Acrylic resin, 101, 103

etc.

5 – 30 No. 3, 5, 8,

107, 109

01Eng_CR10D_WE 6/24/09, 13:5114

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CR10DL-01 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi CR10DL-01 Manual

Product: