DEUTSCH - 15
DEUTSCH
BBEEDDIIEENNUUNNGG ((ffoorrttsseettzzuunngg))
Optionenmenü
Die folgenden Einstellungen stehen zur Verfügung, wenn OPT. im Menü
gewählt worden ist. Wählen Sie einen Punkt mit den Tasten und
und starten Sie den Betrieb.
Tabelle 6. Optionenmenü
Punkt Beschreibung
LAUTST.
Einstellen der Lautstärke:
Verringern der Lautstärke
↔ Erhöhen der Lautstärke
MENÜFARBE
Wählen Sie die Menü-Hintergrundfarbe:
Wählen Sie mit den Tasten und .
TIMER
Start/Stopp des Betriebs: Drücken Sie die Taste oder .
Einstellen des anfänglichen Zeitschalterwertes:
Stellen Sie 1 bis 99 Minuten mit den Tasten und ein.
SPRACHE
Start/Stopp des Betriebs: Drücken Sie die Taste oder .
Wahl der Menüanzeigesprache: Wählen Sie mit den Tasten und
.
AUTOM-AUS
Start/Stopp des Betriebs: Drücken Sie die Taste oder .
Einstellen der automatischen Ausschaltzeit:
Stellen Sie 0 bis 99 Minuten mit den Tasten
und
ein.
Das System tritt automatisch in den Bereitschaftsmodus ein, wenn für
die eingestellte Zeit kein Signal empfangen wird.
Löschen der automatischen Ausschaltzeit:
Wählen Sie LOSCHEN (0 min) mit der Taste .
Wenn LOSCHEN gewählt ist, tritt das System selbst wenn kein Signal
empfangen wird nicht in den Bereitschaftsmodus ein.
SYNC ON G
Start/Stopp des Betriebs: Drücken Sie die Taste oder .
Synchronisation an G gültig: Wählen Sie EIN mit der Taste .
Synchronisation an G ungültig: Wählen Sie AUS mit der Taste .
• Wird möglicherweise mit einigen Eingangssignalen nicht korrekt
angezeigt, wenn SYNC ON G gültig ist. Ziehen Sie in einem solchen
Fall den Signalanschluß ab, so daß kein Signal empfangen wird,
schalten Sie SYNC ON G aus, und schließen Sie das Signal wieder
an.