54106
16
Zoom out
Zoom in
Previous page
1/22
Next page
GB - 15 -
Automatic Search
Programme will be the first selected item as you
enter the TUNING menu. Pressing   or 
button select the programme where you want the
tuned station to be stored. (You may also type the
programme number using the digit buttons.)
 Press 
 or   button to select Band. Using
 or   button, select the band in which
search is to be made.
 With the 
 or   button, select Search. Search
can be made either forward, pressing 
 button or
backwards, pressing 
 button.
 If the tuned station is not the desired one, you can
continue searching pressing 
 or   button
again.
 When the desired station is tuned, select STORE
using 
 or  button and store it to the
programme number you selected pressing 
 or
 button.
 To stop searching before a channel is found, press
the reverse direction button (for example when
searching is made in forward direction, press back-
wards direction button to stop searching).
To name a Programme
First select the programme number you want to name.
Then select name option using
or button. After
that press
or button to select the position of
the letter to be changed and press 
 or button
to change that letter. After that select and change the
other letters as well in order to name the programme
correctly. Finally to store the name, select store option
using
or button and store it pressing or
button.
To change Standard
(You can change this menu only between standards
which your TV set supports.)
Pressing 
 or   button selects the Broadcast
Standard required. Then select the standard you want
pressing 
 or   button. When changing the
standard this way, if the previous channel is not defined
for the new selected standard, then also the channel will
be changed to the first defined channel of that standard
(For example: When changing BG to K1 and the
previous channel is C12, after changing the standard,
the channel will be C4, because the first defined channel
of standard K1 is C4). After that, if it is returned to the
previous standard back, the channel will not be changed
to the previous one anymore (That means, in the
example above, when it is returned from K1 to BG
again, the channel will not change to C12 anymore and
keep C4). Defined channels for different standards are
given as following:
B/G : C01-C69, S01-S41
D/K : C01-C12, C21-C69, S01-S19, S22-S41
I* : C21-C69
I** : C01-C17, C21-C69, S01-S19, S22-S41
L/L : C01-C11, C21-C69, S01-S41
K1 : C04-C09
* U.K. I (UHF)
** IRELAND I (VHF, UHF)
Direct Channel Access
 If you know the broadcast band and channel number
of the station you want to tune, you do not need to
make search; select Band, using 
 or   button
in the TUNING menu. Select the band of the station,
pressing 
 or   button. Then select Channel
pressing 
 or   button. Press   or 
button to find the channel number or directly type it us-
ing the digit buttons. As you change the channel num-
bers the corresponding stations will be displayed.
To store the station to the programme number selected,
select STORE option using 
 or   button and
then press 
 or   button to store it.
Fine Tuning
Picture or sound quality can be poor in areas where the
receptions is weak. In such cases, picture and sound
quality can be improved by fine tuning. To make fine
tuning:
 In the tuning menu, press 
 or   button to se-
lect the Fine Tuning item. Pressing the 
 button
continuously will cause the fine tuning be made for-
ward while pressing the 
 button continuously will
cause the fine-tuning to be made backwards. When
you are satisfied with the reception of transmission,
store it. To store the fine tuning setting select the
STORE option using either the   or  button
and store it to the selected programme number by
pressing either of the 
 or   buttons.
Program (Programming) Menu
Program. (Programming) menu is used to display the
programme names and numbers. You can use this
menu to delete a channel, to insert a channel and to
autostore the programmes.You can access this menu
directly via
INFO button in no menu condition.
Select the PROGRAM Menu pressing the
or
button and open it by pressing 
 or buttons.
When you enter the programme menu, all the
programme numbers and names will be displayed on
the screen. The programme name and number of the
tuned channel will be displayed in red. All the other
channel numbers will be black and at first the
programme number 1 will be flashing. You can move the
flashing number using the or buttons. As you
pass through the programme numbers this way, to
reach the programme number you want, the channels
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP2842AN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP2842AN in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP2842AN

Hitachi CP2842AN User Manual - German - 20 pages

Hitachi CP2842AN User Manual - French - 24 pages

Hitachi CP2842AN User Manual - Italian - 21 pages

Hitachi CP2842AN User Manual - Swedish - 20 pages

Hitachi CP2842AN User Manual - Spanish - 23 pages

Hitachi CP2842AN User Manual - Norwegian - 22 pages

Hitachi CP2842AN User Manual - Finnish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info