505784
27
Zoom out
Zoom in
Previous page
1/115
Next page
27
Operating
1.
Press POSITION button on the remote control when no menu is indicated.
The “POSITION” indication will appear on the screen.
Adjusting the position
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture
position.
When you want to reset the operation, press RESET
button on the remote control during the operation.
To complete this operation, press POSITION button again. Even if you do not do
anything, the dialog will automatically disappear after a few seconds.
When this function is performed on a video signal or an s-video signal, some image
such as an extra-line may appear at outside of the picture.
When this function is performed on a video signal or s-video signal, the range of
this adjustment depends on OVER SCAN in IMAGE menu (
41) setting. It is not
possible to adjust when OVER SCAN is set to 10.
If POSITION button is pressed when a menu is indicated on screen, the displayed
picture does not move its position but the menu does.
This function is unavailable for a signal from the LAN, USB TYPE A / B or HDMI 1 /
2 port.
1.
Press AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (
44).
The vertical position and
horizontal position will be automatically set to the default.
The automatic adjustment operation requires approx. 10 seconds. Also please
note that it may not function correctly with some input.
When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the computer model.
The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (
62).
For a component video signal
The vertical position and horizontal position will be automatically set to the default.
The horizontal phase will be automatically adjusted.
AUTO
button
POSITION
button
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-X8150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-X8150 in the language / languages: English as an attachment in your email.

The manual is 12,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-X8150

Hitachi CP-X8150 User Manual - German - 307 pages

Hitachi CP-X8150 User Manual - Dutch - 307 pages

Hitachi CP-X8150 User Manual - French - 307 pages

Hitachi CP-X8150 User Manual - Italian - 307 pages

Hitachi CP-X8150 User Manual - Polish - 307 pages

Hitachi CP-X8150 User Manual - Portuguese - 307 pages

Hitachi CP-X8150 User Manual - Swedish - 307 pages

Hitachi CP-X8150 User Manual - Spanish - 307 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info