15
Using the security bar and slot
A commercially available anti-theft chain or
wire can be attached to the security bar on
the projector. Refer to the gure to choose
an anti-theft chain or wire.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
Use the supplied adapter cover to prevent
the USB wireless adapter from coming
off easily. When using the adapter cover,
connect the USB wireless adapter to the
further USB TYPE A port from the LAN
port.
1.
Loosen the screw (marked with
triangle) on the bottom left of the
USB TYPE A ports.
2.
Insert the tab of the cover into the
hole at the upper right of the USB
TYPE A ports in the direction of the
arrow.
3.
Align the screw holes on the projector and the cover. Then insert the screw
removed from the projector into the hole and tighten the screw.
►Do not use the security bars and slot to prevent the projector
from falling down, since it is not designed for it.
►Do not place anti-theft chain or wire near the exhaust vents.
It may become too hot.
WARNING
CAUTION
• The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
• The safety bar (
4) can be used for the same purpose as the security bar.
NOTE
Setting up
Fastening the adapter cover
►Keep small parts away from children and pets. Take care not
to put in the mouth.
WARNING
Tab
2
1
3
Anti-theft
chain or wire
security bar
19mm
11mm
Security slot
15mm
