538051
117
Zoom out
Zoom in
Previous page
1/118
Next page
117
Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
NOTE
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defect
Reference
page
Schedule
function does
not work
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
48
The internal clock has been reset.
Once you turn off the projector in the SAVING mode or the
AC power, the current date and time setting is reset.
Check the DATE AND TIME setting for WIRELESS
SETUP or WIRED SETUP in the NETWORK menu.
70, 74
When the
projector is
connected to
wired LAN, it
powers off and
on as described
below.
Powers off
POWER indicator
blinks in orange a
few times
Goes into
standby mode
Disconnect the LAN cable and check that the projector
is working properly.
If this phenomenon occurs after connecting to the network,
there may be a loop between two Ethernet switching hubs
within the network, as explained below.
-
There are two or more Ethernet switching hubs in a network.
- Two of the hubs are doubly connected by LAN cables.
-
This double connection forms a loop between the two hubs.
Such a loop may have an adverse effect on the projector
as well as the other network devices.
Check the network connection and remove the loop by
disconnecting the LAN cables such that there is only one
connecting cable between two hubs.
Unable to save
the CLONING
data
.
USB memory is out of memory.
Please delete unnecessary files to free up memory.
At least
1MB of memory is needed.
USB memory is write-protected.
Unlock the USB memory.
64 ~ 66
Unable to load
the CLONING
saved data
.
Unable to find the saved data from USB memory.
Execute SAVE then LOAD by going through the procedure.
File name of USB memory doesn't match.
Please assign "pj_data.bin" for setting data, and for
MyScreen "pj_logo.bmp" or "pj_logo.gif".
STANDBY mode is set to SAVING.
Switch the SAVING to NORMAL in STANDBY MODE
under SET UP menu beforehand to load the CLONING
data using control panel on the projector while the lamp
is in standby state.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-X3030WN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-X3030WN in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-X3030WN

Hitachi CP-X3030WN User Manual - German - 29 pages

Hitachi CP-X3030WN User Manual - Dutch - 29 pages

Hitachi CP-X3030WN User Manual - French - 69 pages

Hitachi CP-X3030WN User Manual - Italian - 29 pages

Hitachi CP-X3030WN User Manual - Polish - 69 pages

Hitachi CP-X3030WN User Manual - Portuguese - 29 pages

Hitachi CP-X3030WN User Manual - Swedish - 29 pages

Hitachi CP-X3030WN User Manual - Spanish - 29 pages

Hitachi CP-X3030WN User Manual - Norwegian - 29 pages

Hitachi CP-X3030WN User Manual - Finnish - 29 pages

Hitachi CP-X3030WN User Manual - Finnish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info