538050
112
Zoom out
Zoom in
Previous page
1/118
Next page
112
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, please make
confirmation of the attachment state of the lamp and lamp cover, and then turn
the power on again.
If the projector is used at an altitude of about 1600 m (5250 feet)
or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH (
60).
Otherwise, set it to NORMAL.
NOTE
Troubleshooting
POWER
indicator
LAMP
indicator
TEMP
indicator
Description
Blinking In
Green for
approx. 3
seconds.
Turned
off
Turned
off
At least 1 Power ON schedule is saved to the
projector.
Please refer to Schedule Settings in the Network
Guide.
Lighting
In
Orange
Lighting
In
Red
Lighting
In
Red
Loading the saved data of CLONING on STANDBY
MODE.
Blinking
In
Orange
Blinking
In
Red
Blinking
In
Red
Loading the saved data of CLONING has failed on
STANDBY MODE.
Please refer to CLONING (
64 ~ 66).
Turned
off
Turned
off
Turned
off
Loading the saved data of CLONING has succeeded
on STANDBY MODE.
Regarding the indicator lamps (continued)
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-X2530WN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-X2530WN in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-X2530WN

Hitachi CP-X2530WN Additional guide - English - 69 pages

Hitachi CP-X2530WN User Manual - German - 29 pages

Hitachi CP-X2530WN User Manual - Dutch - 29 pages

Hitachi CP-X2530WN User Manual - French - 69 pages

Hitachi CP-X2530WN User Manual - Italian - 29 pages

Hitachi CP-X2530WN User Manual - Polish - 69 pages

Hitachi CP-X2530WN User Manual - Portuguese - 29 pages

Hitachi CP-X2530WN User Manual - Swedish - 29 pages

Hitachi CP-X2530WN User Manual - Spanish - 29 pages

Hitachi CP-X2530WN User Manual - Norwegian - 29 pages

Hitachi CP-X2530WN Additional guide - Finnish - 29 pages

Hitachi CP-X2530WN User Manual - Finnish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info