538050
21
Zoom out
Zoom in
Previous page
1/118
Next page
21
1.
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
Turning on the power
2.
Make sure that the POWER indicator is
steady orange (
110). Then remove the
lens cover.
3.
Press STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop blinking and light in steady
green (
110).
Power on/off
To display the picture, select an input signal according to the section Selecting an
input signal (
24).
Power on/off
The INITIAL SETTING Menu will be displayed by factory default upon startup.
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET
(
67) is executed. If you wish to change the settings, refer to the LANGUAGE
(
50) and ALTITUDE (60) menu.
(1) LANGUAGE: Use the ▲/▼/◄/►
buttons to select the desired language
and press the ENTER button of the
remote control or the INPUT button of
the projector to execute.
(2) ALTITUDE: Use the ▲/▼ buttons to
select NORMAL for altitude below 1600
m (5250 feet), otherwise select HIGH
and press the ENTER button of the
remote control or the INPUT button of
the projector to execute.
VIDEO
DOC.CAM
ERA
KEYSTON
E
ASPECT
SEARCH
BLA
NK
MUTE
MY
BUTTON
POSITION
ESC
MENU
RE
SET
COMPUT
ER
MY SOUR
CE/
AUTO
MAGNIFY
PAGE
DOWN
ON
OFF
FREEZE
UP
VOLUME
ENTER
STANDBY/ON button
POWER indicator
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-X2530WN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-X2530WN in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-X2530WN

Hitachi CP-X2530WN Additional guide - English - 69 pages

Hitachi CP-X2530WN User Manual - German - 29 pages

Hitachi CP-X2530WN User Manual - Dutch - 29 pages

Hitachi CP-X2530WN User Manual - French - 69 pages

Hitachi CP-X2530WN User Manual - Italian - 29 pages

Hitachi CP-X2530WN User Manual - Polish - 69 pages

Hitachi CP-X2530WN User Manual - Portuguese - 29 pages

Hitachi CP-X2530WN User Manual - Swedish - 29 pages

Hitachi CP-X2530WN User Manual - Spanish - 29 pages

Hitachi CP-X2530WN User Manual - Norwegian - 29 pages

Hitachi CP-X2530WN Additional guide - Finnish - 29 pages

Hitachi CP-X2530WN User Manual - Finnish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info