505786
106
Zoom out
Zoom in
Previous page
1/115
Next page
106
Message Description
An improper signal is input.
Please conrm the specs for your projector or the signal
source specs.
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having conrmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air lter dirty?
• Does the peripheral temperature exceed 40°C?
• Is the setting for ALTITUDE appropriate?
For details of ALTITUDE, refer to ALTITUDE of
SERVICE in the OPTION menu (
62). If the projector is
used with a wrong setting, it may cause damage to the
projector itself or the parts inside.
A note of precaution when cleaning the air lter.
Please immediately turn the power off, and clean or
change the air lter referring to the Cleaning and
replacing the air lter section of this manual. After you
have cleaned or changed the air lter, please be sure to
reset the lter timer (
60, 102).
The button operation is not available.
Check the button you are going to use. Even when a
usable button is pressed, all button operations are not
available under the following conditions.
- While the lens is moving, button operation from the
control panel or the remote control might be ignored.
- Pressing the one of buttons to call a signal input might
be ignored, when all the input ports belonging to the
category the button's name shows are set to the "SKIP"
by the item SOURCE SKIP of the OPTION menu.
Troubleshooting
Related messages (continued)
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-WX8240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-WX8240 in the language / languages: English as an attachment in your email.

The manual is 12,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-WX8240

Hitachi CP-WX8240 User Manual - German - 307 pages

Hitachi CP-WX8240 User Manual - Dutch - 307 pages

Hitachi CP-WX8240 User Manual - French - 307 pages

Hitachi CP-WX8240 User Manual - Italian - 307 pages

Hitachi CP-WX8240 User Manual - Polish - 307 pages

Hitachi CP-WX8240 User Manual - Portuguese - 307 pages

Hitachi CP-WX8240 User Manual - Swedish - 307 pages

Hitachi CP-WX8240 User Manual - Spanish - 307 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info