505790
233
Zoom out
Zoom in
Previous page
1/307
Next page
26
Setting input ports using menu
5.3 Starting up Main projector
After performing section 5.2 Checking Main projector's operating status, the two
projectors are conrmed to have been set to ALTERNATE mode and the Sub
projector is currently operating. As the settings for Intellectual Stack can be
changed only when the Main projector is operating, this section explains how to
switch from the Sub projector to the Main projector.
1.
Use the /// buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(
Operating Guide OPTION menu)
2.
Check the ALTERNATE MODE setting in the menu.
If NORMAL is displayed, the two projectors are turned on alternately. Therefore,
the Main projector will be turned on if you restart the projectors.
(1)
Press the 67$1'%< button on the remote control or 67$1'%<21 button of
the Main projector. The Sub projector will turn off.
(2) After the projector has cooled down, press the 21 or 67$1'%<21 button to
turn on again. The Main projector will be turned on.
If AUTO is displayed, the projector with the least lamp usage is turned on.
Therefore, the Main projector may not be turned on even if you restart the
projectors. Follow the procedures below to turn on the Main projector.
(1) Use the / button to highlight STACK MODE, and press the button to
display the STACK MODE dialog.
(2) Use the / button to highlight OFF, and then press the button to complete
the setting. (
19
)
(3) Repeat the above procedures to display the STACK MODE dialog again.
(4) Use the / button to highlight SUB, and then press the button to
complete the setting. (
19
)
(5) After exiting the menu, wait for 10 seconds or more.
(6) Press the 67$1'%< button on the remote control or 67$1'%<21 button of
the Main projector. The Sub projector will turn off.
(7) After the projector has cooled down, press the 21 or 67$1'%<21 button to
turn on again. The Main projector will be turned on even if LAMP MODE has
been set to AUTO.
3.
You can change the settings for Intellectual Stack now that the Main projector
is operating. Go to
5.4 Setting the menu. (
27
)
NOTE • If the Main projector cannot be turned on due to error or certain
problems, the Sub projector will be turned on even if you follow the procedures
above. Take necessary actions to x the Main projector, and then change the
settings for Intellectual Stack.
233


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-WU8450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-WU8450 in the language / languages: English as an attachment in your email.

The manual is 10,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-WU8450

Hitachi CP-WU8450 User Manual - German - 307 pages

Hitachi CP-WU8450 User Manual - Dutch - 307 pages

Hitachi CP-WU8450 User Manual - French - 307 pages

Hitachi CP-WU8450 User Manual - Italian - 307 pages

Hitachi CP-WU8450 User Manual - Polish - 307 pages

Hitachi CP-WU8450 User Manual - Portuguese - 307 pages

Hitachi CP-WU8450 User Manual - Swedish - 307 pages

Hitachi CP-WU8450 User Manual - Spanish - 307 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info