505790
223
Zoom out
Zoom in
Previous page
1/307
Next page
16
STACK menu settings
NOTE • When DUAL is selected for LAMP MODE, the images projected
from the Main and Sub projectors may be different. It is recommended to set
the projectors as follows.
- Set the same image for TEMPLATE and START UP on the Main and Sub
projectors.
- Capture the same image for MyScreen on the Main and Sub projectors.
- Save the same image on MY IMAGE on the Main and Sub projectors.
- Set the same message content for the Messenger function (
Network Guide
Messenger Function) on the Main and Sub projectors.
• When DUAL is selected for LAMP MODE, image shift can result in image
quality degradation on the screen. Perform the INSTALLATION setting before
adjusting the image position as the image position will change when the
INSTALLATION setting is changed. (
Operating Guide SETUP menu)
• When ALTERNATE is selected and an error occur on the projector in
operation causing the lamp to turn off, the other projector will automatically start
to operate. However, if the RS-232C cable is disconnected or AC power is not
supplied, the other projector will not turn on.
• In cases when PIN LOCK or TRANSITION DETECTOR on both projectors
is set to ON (
Operating Guide SECURITY menu), the two projectors will
not turn on even if ALTERNATE is selected. Enter the security code on both
projectors and one of the projectors will turn on.
• When Intellectual Stack is in use, the 32:(5 indicator on the projector
operates differently from normal.
(
Operating Guide Troubleshooting)
When both the Main and Sub projectors are in standby mode, the Main
projector determines which projector to turn on according to the STACK MODE
setting if the 21 button on the remote control or 67$1'%<21 button of the
Main projector is pressed.
- The 32:(5 indicator on the Main projector blinks in green while the Main
projector determines which projector to turn on.
- If the Main projector is turned on, the 32:(5 indicator on the Main projector
turns to steady green after lighting up, as per normal.
- If the Sub projector is turned on, the 32:(5 indicator on the Main projector
lights in orange after the Sub projector is turned on.
- If an error occurs on the Main projector, the Sub projector turns on and the
32:(5 indicator on the Main projector lights or blinks in red.
3.3 Selecting lamp operation mode (continued)
223


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-WU8450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-WU8450 in the language / languages: English as an attachment in your email.

The manual is 10,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-WU8450

Hitachi CP-WU8450 User Manual - German - 307 pages

Hitachi CP-WU8450 User Manual - Dutch - 307 pages

Hitachi CP-WU8450 User Manual - French - 307 pages

Hitachi CP-WU8450 User Manual - Italian - 307 pages

Hitachi CP-WU8450 User Manual - Polish - 307 pages

Hitachi CP-WU8450 User Manual - Portuguese - 307 pages

Hitachi CP-WU8450 User Manual - Swedish - 307 pages

Hitachi CP-WU8450 User Manual - Spanish - 307 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info